spot_img

Electroimpact, Toray And Janicki Advance Processing Technologies For Rapid Manufacture Of Large Thermoplastic Composite Parts

Date:

Share:

Electroimpact, Toray And Janicki Advance Processing Technologies For Rapid Manufacture Of Large Thermoplastic Composite Parts

A joint advancement between Electroimpact, Toray Advanced Composites, and Janicki Industries has achieved a leap forward in the high-speed manufacture of large thermoplastic composite parts. The project has resulted in the extension of automated, cost-effective processing technologies that can manufacture large-scale thermoplastic parts at high-speed deposition rates of up to 4000 inches (100 meters) per minute.

 

Electroimpact, High-speed Automated Fiber Placement (AFP) equipment has been enhanced for processing thermoplastic materials with a Variable-Spot-Size Laser heating system. This system uses a wide range of processing temperatures for robust process control across single tows to accommodate severe contours while allowing thermoplastic composite parts to be repairable during AFP lay-up, thereby decreasing the risk of wastage throughout the manufacturing process.

 

Processing speeds of up to 4000 IPM (100 m/min) have been achieved with light or heavy tack levels to guarantee part geometry. “When these advancements are combined with increased AFP reliability, in-process real-time inspection and maintenance intervals, the resulting AFP 4.0 processing increases 4x-6x current productivity”, Michael Assadi, Chief Engineer at Electroimpact”.

 

To maximize production performances, the AFP layup is developed directly on an out-of autoclave heated lay-up tooling system, engineered by Janicki Industries, which is then fully consolidated in-situ, achieving a complete thermal process cycle in less than one hour. The tooling mode is designed for scalability to support parts that are too large for traditional heated press applications and achieves significantly faster cycle times than high-temperature autoclaves.

 

For more details: www.toraytac.com

- Advertisement -spot_img
- Advertisement -spot_img

━ More Like This

PLASTASIA 2027 Gains Traction as Exhibition Bookings Reach 85%

PLASTASIA 2027 Gains Traction as Exhibition Bookings Reach 85% The 9th edition of PLASTASIA, scheduled to take place between 20th and 23rd May, 2027 at...

ENVIA ESSENTIAL Helps Tackle Organic Buildup in Hard-Water Applications

ENVIA ESSENTIAL Helps Tackle Organic Buildup in Hard-Water Applications Bionetix has introduced ENVIA ESSENTIAL, a ready-to-use enzymatic concentrate designed to help food service, food processing,...

ZAHORANSKY to Adjust German Operations, Up to 120 Jobs Impacted

ZAHORANSKY to Adjust German Operations, Up to 120 Jobs Impacted ZAHORANSKY AG is planning further measures to future-proof the ZAHORANSKY Group at its German sites....

Covestro and puren Boost Environmental Performance of purenit®

Covestro and puren Boost Environmental Performance of purenit "With ISCC PLUS certification across our entire purenit® production we have the basis to use Desmodur®...

AZL Deploys JetBlast System for Next-Generation Battery-Enclosure Development

AZL Deploys JetBlast System for Next-Generation Battery-Enclosure Development Validated test system enables reproducible application-specific temperature, flame and hot-particle load profiles – benchmark test campaign starts...