Destination circular economy: Starlinger’s new backflush filter allows manufacturers of woven bags made of polypropylene tapes to use a proportion of recycled polypropylene of 50% and more in the tape extrusion process.

In times where buzzwords like sustainable packaging and closed packaging cycles are on everyone’s lips, Starlinger & Co. GmbH is now able to provide another solution to the plastic packaging industry that will ensure greater sustainability. “With our SPB filter, we are offering tried and tested technology that enables woven bag manufacturers to use recycled material for bag production without compromising on quality and cost-effectiveness. As such, you get exactly the same specifications and properties with recycled input material as with tapes made from 100% virgin material,” explains Hermann Adrigan, Head of Sales at Starlinger. Especially when it comes to packaging made of tape fabric, which is characterised by its high strength properties, high-quality tapes are the most important requirement. The tear-resistant sacks are filled with up to 50 kg of contents – in the case of big bags, the fabric even has to sustain two to three tonnes of weight. When using recycled material, the Starlinger SPB filter ensures excellent melt filtration for the high tape quality required. “This enables fabric bag manufacturers to work even more sustainably and at the same time meet a criterion that is becoming increasingly important in the packaging market: the amount of recycled content in the product,” says Adrigan.
50% and more of recycled content
In tape production, impurities and, in many cases, the range of different polymers in the recycled input material cause problems such as filter blockages or tape tears, which, in turn, reduce production efficiency. The SPB melt filter from Starlinger, on the other hand, achieves a high melt throughput with excellent cleaning capacity even in the case of more heavily contaminated input material. This way, a stable production process and high degree of efficiency are ensured.Thanks to the hydraulic backflushing function of the filter, the respective filter screen is backflushed and thus cleaned when a defined degree of contamination is reached. The backflush cycles are relatively short due to the high pressure build-up in the filter, and the extrusion process is not interrupted – an important criterion that saves material and time. Depending on the degree of contamination of the melt, the filter can achieve throughput rates of up to 720 kg/hour and allows for 50% and more of recyclate in tape production.
Know-how for a closed packaging cycle
“For optimum recyclate quality, our division Starlinger recycling technology offers recycling plants that are tailored to the specific needs of bag manufacturers,” adds Hermann Adrigan. “In principle, we at Starlinger combine the know-how and technology for “circular packaging” under one roof: From the manufacturing process and the packaging recycling process to reusing the recyclate for the same product. And our customers benefit from this. With our equipment, it is a lot easier for packaging manufacturers to use recycled material in the extrusion process because they can rely on the quality of the recycled pellets.” Design for Recycling is another important criterion for implementing a circular economy in the packaging sector. “In this respect, woven bags made of polypropylene are the perfect example,” says Adrigan. “They are a mono-material packaging consisting of 99% PP – even if they are coated. Considering this, it is obvious that the bags should be collected after usage and recycled. We want to promote and advance this process with our technologies.”
www.starlinger.com



In this context, the low-loss DC voltage featuring the latest HARTING high-current connectivity charges the battery of the e-vehicle in the shortest possible time. “Over the recent months, e-mobility has picked up tremendous momentum. There’s no denying: high-performance fast charging will further improve acceptance of e-vehicles among drivers,” as Marco Grinblats, Managing Director of HARTING Automotive stated. The breakthrough of e-mobility depends decisively on user-friendly charging infrastructure. “Fast charging technology with the DC charging plug CCS is a prerequisite for ensuring that in future vehicles will be supplied with sufficient power – not in a matter of hours, but in a few minutes,” as Marco Grinblats underlined. Power from wind turbines to charging stations HARTING is a technology partner covering the entire energy process chain – from the renewable energy generation of wind energy to decentralised energy storage and the DC infrastructure all the way through to e-mobility charging plugs. With this comprehensive scope, HARTING differentiates itself from its market competitors. HARTING is an enabler for reliable, clean and environmentally friendly e-mobility. The technology group is supplying charging solutions for Volkswagen’s modular e-drive system (MEB), as well as the Audi e-tron and the Porsche Taycan platforms, among others. Last summer, HARTING Automotive took the prestigious Volkswagen Group Award 2020 in the E-Mobility category. With this award, the Volkswagen Group acknowledged the exceptional achievements and high level of flexibility with which HARTING Automotive is contributing to the success of Volkswagen AG.As part of the HANNOVER MESSE format, the main areas of application for HARTING in the field of today’s charging infrastructure for electromobility were presented. One example of AC charging solutions is the Innogy Wall-Box, which can be used not only as a charging station in public areas, but also in the private sector as a Wall-Box. It underlines the trend towards modularity: with this customized OEM connectivity solution, HARTING ensures flexible and individual use by end users.In cooperation with Porsche, HARTING has created a DC charging solution that can transfer very high power to the vehicle’s energy storage system for a short time. A new innovative cooling technology ensures that all necessary parameters are maintained.HARTING Automotive has put in strong growth over the past three years. “E-mobility topics have shifted up three gears in a very short time. I am most pleased to see the continued strong demand for HARTING solutions in this area,” as Grinblats concludes. A keen eye on the mobility concepts of the futureHARTING has long been involved in the mobility concepts of the future. The Technology Group looks back on many years of successful cooperation with the innovative Swiss automobile manufacturer Rinspeed. The ground-breaking “metroSNAP” concept vehicle launched by Rinspeed AG is also – and once again -relying on innovative HARTING technology. HARTING is contributing a specially designed interface supplying the vehicle with Power, Data and Signals.
