spot_img
Home Blog Page 17

Longer Life, Lower Cost: MAAG’s Advanced Duration Cutting Blade

Longer Life, Lower Cost: MAAG’s Advanced Duration Cutting Blade

During strand pelletizing of fiber-reinforced plastics (FRP compounds), abrasive polymer strands put extreme stress on the bed knife with its cutting blade. MAAG has responded to this challenge with its new Duration cutting blade, which was developed specifically for this application.

 

Until today, cutting blades for MAAG strand pelletizers have been available with three different blade designs: tungsten carbide (HM), ceramic (CE), or with a diamond-coated surface (PCD). However, when processing high-strength, fiber-filled and highly abrasive polymer strands for FRP compounds, all three material variants have not only characteristic strengths but also weaknesses.

For example, the cutting edge of HM and CE blades have a life of 100 operating hours due to the high abrasiveness of fiber-reinforced plastics. Ceramic blades are susceptible to fracture; and as a result, the cutting edge or even the entire blade must be replaced frequently. This not only affects productivity, but also the quality of the pellets produced.

This is why diamond-tipped PCD blades are often used in FRP applications. Their hard surface gives them a significantly longer service life. However, they are up to five times more expensive than carbide or cemented carbide tools.

Newly developed material: longer service life at an affordable price

MAAG responded to this challenge with its new Duration cutting edge, which expands the existing range of solutions today: The development features a new material called VS23 which increases the hardness of the surface by up to 70 percent, thereby reducing wear rate. This extends the service life by a factor of 5 to 9 compared to conventional carbide tools. VS23 represents a cost-effective alternative especially with its four cutting edges to the use of PCD blades with diamond segments on one edge only. The performance of the new blades has already been comprehensively validated in the laboratory and in practice.

www.maag.com

#MAAG #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

50 Years of Leadership in Sustainable Plastics Recycling

50 Years of Leadership in Sustainable Plastics Recycling

PIMCO: From Mini Granulators to Global Recycling Machinery Solutions

Five decades of innovation, engineering precision and customer commitment have shaped PIMCO’s journey in plastics recycling machinery, led by founder Mr. N. Chandrakant and the second generation, Mr. Vinay Nandwana and Mr. Vipul Nandwana.

In an industry where technological advancement and sustainability are becoming increasingly important, five decades of experience represent more than just a milestone. They reflect a legacy of vision, perseverance and continuous innovation. PIMCO, which began its journey in 1975 with the manufacturing of mini granulators, has grown into an established name in plastics recycling and processing machinery, serving customers across India and international markets.

At the heart of this journey is Mr. N. Chandrakant, Chairman and Managing Director of PIMCO, whose vision took shape at a time when plastics recycling had yet to receive the attention it commands today. His forward-thinking approach laid the foundation for a business that would evolve alongside the changing needs of the plastics industry. Today, the next generation, Mr. Vinay Nandwana and Mr. Vipul Nandwana, is carrying that legacy forward with a renewed emphasis on global markets, technological advancement and customer-focused solutions.

A Vision Ahead of Its Time

When PIMCO began operations in 1975, its focus was on manufacturing mini granulators. The decision to invest in recycling machinery at a time when the sector was still developing demonstrated a willingness to look beyond immediate market opportunities and anticipate the industry’s future needs.

Over the years, PIMCO’s journey has been defined by a consistent desire to develop, improve and expand. From its early mini granulators, the company progressively broadened its engineering capabilities to manufacture both the smallest and the largest sizes of granulators, with an emphasis on precision, durability and reliable performance.

For Mr. N. Chandrakant, innovation has always been central to business development. His philosophy reflects the importance of experimentation, calculated risk-taking and continuous learning.

Mr. N. Chandrakant, Chairman & Managing Director, says:

“Innovate, experiment and take risks. Over the years, this approach has led our team and our entire company to great amounts of success.”

This philosophy captures the spirit behind PIMCO’s evolution. Rather than remaining confined to its original product category, the company has continued to explore new designs, develop machinery and respond to the increasingly diverse requirements of plastic processors.

The Next Generation: Taking the Legacy to Global Markets

Building on the foundation established by Mr. N. Chandrakant, the second generation, Mr. Vinay Nandwana and Mr. Vipul Nandwana, is focused on taking PIMCO into its next phase of growth.

The global plastics industry is undergoing significant change, driven by growing interest in resource efficiency, material recovery, manufacturing productivity and improved recycling practices. For machinery manufacturers, these developments create opportunities to serve customers with more versatile, efficient and dependable equipment.

Under the leadership of Mr. Vinay Nandwana and Mr. Vipul Nandwana, PIMCO’s focus on international markets and technological upgrades reflects an ambition to strengthen its presence beyond domestic boundaries while maintaining the values on which the company was built.

Their challenge is not simply to preserve a 50-year-old legacy, but to build upon it. This means combining the experience accumulated over decades with contemporary manufacturing practices, professional management, evolving customer expectations and continued product development.

The second generation represents the bridge between the company’s established engineering heritage and its future ambitions.

Engineering Precision: From the Smallest to the Biggest

PIMCO’s central strength lies in its focus on manufacturing machinery across a broad range of sizes and applications. The company’s experience in granulator manufacturing enables it to address different processing requirements, from compact equipment to large-capacity granulation solutions.

Precision, durability and reliability remain the guiding principles behind PIMCO’s approach to machinery manufacturing.

In plastics processing, machinery performance can influence material recovery, production continuity, operating efficiency and maintenance requirements. Customers therefore need equipment that is suited to their applications and capable of delivering consistent performance over time.

PIMCO’s emphasis on quality and robust construction is intended to support these expectations. Its broad product portfolio also enables the company to cater to customers with varying production needs rather than limiting its expertise to a single type of machine.

With more than 300 machines reportedly delivered worldwide annually, PIMCO continues to serve a diverse customer base across Indian and overseas markets. This international reach reflects the importance of dependable machinery and application-oriented solutions in the plastics processing industry.

A Comprehensive Product Portfolio

PIMCO has developed an extensive range of machinery to address the varied requirements of plastics recycling, size reduction, mixing, material handling and processing.

Its product portfolio includes:

  • Granulation solutions: Granulators, jumbo granulators, inline sheet granulators, inline edge granulators, trim roll feed granulators, slow-speed granulators, medium-speed granulators, low-noise granulators and wet grinders.
  • Recycling and size-reduction equipment: Shredders, agglomerators, pulverisers, lump cutters and reprocessing machines with pelletising systems.
  • Material handling and dust management: Hopper loaders, granulators with blowers and dust collectors, and granulator systems with conveyors, blowers and silos.
  • Mixing and blending equipment: Single conical mixers, conical pan mixers, dry colour mixers, vertical colour mixers, Roto Cube mixers and high-speed compounding mixers.
  • Auxiliary equipment: Hopper dryers, circular vibratory screens and knife sharpeners.

This extensive range allows PIMCO to offer solutions for different stages of plastics processing and recycling. By combining product variety with its experience in granulator manufacturing, the company aims to provide customers with practical machinery options suited to their operational requirements.

Quality as a Business Commitment

For PIMCO, quality is not limited to the finished machine. It is an approach that encompasses product development, manufacturing processes, employee involvement, technical skills and customer service.

The company has emphasised continuous improvement, conformance to specifications, efficient quality management and ongoing employee training as key elements of its quality policy.

PIMCO’s historical quality credentials include ISO 9001:2008 certification through URS Quality Management Systems, United Kingdom, with UKAS accreditation cited in its company records in January 2009. This certification is an important part of the company’s quality history; its current certification status should be verified separately.

The company’s commitment to quality also extends to the relationships it builds with customers. Its objective is to understand individual processing requirements and provide machinery that supports productivity, dependable operation and long-term value.

As PIMCO’s philosophy suggests, the quality and durability of a machine are an investment that begins to pay back from day one.

Professionalism, Manufacturing and Customer Satisfaction

PIMCO’s development has taken place alongside the transformation of the Indian economy and its increasing integration with global markets. This transition has created opportunities for Indian engineering companies to strengthen their capabilities, adopt professional management practices and compete internationally.

PIMCO recognises professionalism at every level as an important contributor to business growth. Its emphasis on team involvement, employee development and customer satisfaction reflects an understanding that manufacturing excellence depends on people as much as machinery.

The company’s production facilities, established in 1975, have supported its manufacturing journey. Over the decades, the emphasis on developing new products and upgrading technology has helped PIMCO broaden its offerings and respond to changing industry requirements.

Its history of product development includes portable mini granulators, granulators incorporating control panels and safety devices, dual-chamber granulators, integrated granulator systems, conical and vertical mixers, Roto Cube mixers and staggered-rotor universal granulators.

These developments illustrate a continuing effort to adapt machinery design to practical processing needs.

The Road Ahead: Innovation with Experience

As the plastics industry continues to evolve, recycling machinery manufacturers have an important role to play in enabling efficient material recovery and supporting more responsible use of resources. The future will demand equipment that combines dependable engineering with adaptability, productivity and increasingly sophisticated processing requirements.

For PIMCO, the next chapter is an opportunity to bring together the founder’s entrepreneurial vision, five decades of manufacturing experience and the global outlook of the second generation.

Mr. N. Chandrakant established the vision. Mr. Vinay Nandwana and Mr. Vipul Nandwana are carrying it forward. Together, their roles represent the continuity of a family-led manufacturing enterprise that has grown alongside the plastics industry.

Fifty years after beginning with mini granulators, PIMCO’s focus remains on manufacturing machinery with precision, expanding its capabilities and serving customers with quality and reliability.

Its journey is a reminder that lasting industrial success is built not through a single breakthrough, but through decades of consistent effort, learning and adaptation.

Fifty years of excellence is not merely a celebration of the past. For PIMCO, it is a foundation for the future — driven by innovation, guided by experience and strengthened by a commitment to the plastics industry.

https://www.pimcomachine.in/

#pimco #ModernPlasticsNetwork   #ModernPlasticsGlobal   #ModernPlasticsIndiaMagazine #PrintPublication #PrintMagazine #Modernplasticsnetwork #ModernPlasticsisrael

Shaping the Future: HASCO Innovations on Display at K 2025

Shaping The Future: HASCO Innovations On Display At K 2025

As a reliable and responsible partner for mouldmaking and the plastics-processing industry, HASCO will be focusing at K2025 on practice-related new and further developments, digitisation in mouldmaking, process reliability and energy efficiency – all with the aim of integrating sustainable and future-oriented solutions.
The latest new products will be presented live in Hall/Stand 1/C06.

For decades, HASCO has stood as a pioneer in the field of modular mould systems, providing engineers and processors with standardised, high-precision components that have reshaped the efficiency of tool and mouldmaking worldwide. At K 2025 in Düsseldorf, Germany (October 8–15), the company will once again underline its role as an innovation leader, combining technical expertise with digital services to ensure customers have access to both cutting-edge hardware and state-of-the-art digital solutions.

Mould Base innovations

The cooling range has been increased. The extended cooling system Ø5 allows precise cooling of slide bars and small moulds – ideal for complex applications with limited build volume. Efficient temperature control is one of the key factors in injection moulding, as it directly affects cycle times, part quality and process stability. By introducing the extended cooling system, HASCO enables toolmakers to achieve greater precision in cooling layouts, which is especially important for moulds with restricted space or demanding geometries such as thin-walled or micro-injection applications.

The portfolio is supplemented by further chemical working substances with NSF H1 certification, which meet the highest safety standards in food and medical technology. This expansion demonstrates HASCO’s commitment to supporting industries that must meet strict hygiene regulations. NSF H1-certified lubricants and chemicals are globally recognized for use in applications where incidental contact with food is possible, ensuring both compliance and safety in sensitive manufacturing environments.

With a new slide retainer, HASCO offers a reliable solution for avoiding damage and malfunctions with slide inserts. The new InsertKey also enables unambiguous coding of inserts – for a better overview and process reliability in mouldmaking. These practical developments address day-to-day challenges in tool shops and on production floors. By preventing misalignments and enabling clear identification, HASCO is helping customers to avoid costly downtime, reduce human error, and maintain smooth-running production.

Hot Runner innovations

HASCO hot runner will show some new developments in the field of additive manufacturing in hot runner technology, and how these can contribute to making mouldmaking fit for the future. Additive manufacturing is opening entirely new possibilities for hot runner design, allowing for highly customized, efficient geometries that were not possible with conventional manufacturing methods. By adopting this approach, HASCO ensures that its customers can benefit from reduced material waste, lower pressure loss, and improved melt distribution.

In addition to additively manufactured hot runners and filters with the highest possible throughput and the lowest shear, the focus is on methods for simple mould diagnosis in order to recognise wiring problems quickly and efficiently from the very beginning. The ability to troubleshoot and identify wiring or connection issues in hot runner systems right from setup not only saves time but also prevents potential damage to moulds and ensures maximum uptime in production.

Apart from other highlights, visitors will be able to witness the fast and intuitive ordering of spare parts – thanks to paperless mould documentation. This can always be called up directly at the mould. This feature reflects HASCO’s strong emphasis on digitalisation. By offering paperless documentation that can be accessed instantly, customers gain quicker access to critical information, simplify inventory management, and accelerate maintenance processes. The seamless integration of hardware and digital tools is a hallmark of HASCO’s forward-looking service philosophy.

HASCO, the pioneer of mouldmaking, supports its customers from the original idea to the final manufacture – with 100 ideas in the past and 100 ideas for the future. This guiding principle has defined the company since it introduced the world’s first standard mould base in 1960, revolutionizing tool and mouldmaking by enabling modular and interchangeable components. Today, HASCO continues to build on this legacy with over 100,000 standard parts in its catalogue, as well as software solutions and online configurators that make mould design and ordering more efficient than ever before.

At K 2025, visitors will see not only HASCO’s technical innovations but also its vision for sustainable, energy-efficient, and digitised mouldmaking. Whether through enhanced cooling systems, smart hot runner technologies, or digital spare part services, HASCO is empowering mouldmakers and processors to achieve higher productivity, lower environmental impact, and greater process security.

https://www.hasco.com/en/

#Hasco#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

Next-Gen All-Electric PX Series At K 2025: Compact, Economical, And Built For The Future

Next-Gen All-Electric PX Series At K 2025: Compact, Economical, And Built For The Future

From technical components to medical technology and packaging: all-electric injection molding machines are gaining ground in all industries worldwide. KraussMaffei has completely redesigned its well-known PX series and will launch it at K 2025 with clamping forces ranging from 800 to 2,000 kN.
“It is the most modern all-electric injection molding machine in the world. We have made it more compact, more productive, and more sustainable from the ground up.” Jörg Stech, Chairman of the Management Board of KraussMaffei Technologies GmbH, is proud of the new PX. The development team achieved this through a new structural design with optimized arrangement of individual components, new servo drive technology with electric ejector, and a modular, space-saving enclosure.
Key success factors of the previous PX series have been retained. The particularly large tie-bar spacing continues to allow the use of complex and heavy molds. The wide support of the movable clamping plate guarantees perfect plate parallelism, and the linear guide ensures precise, energy-efficient movements. Energy recovery (recuperation) also remains an integral part of the PX series, as does high flexibility for a wide range of industrial applications.

More speed, less energy consumption
All main axes and the new ejector are servo-electric. This not only improves cycle performance in the new PX, but also reduces energy consumption by around 20 percent. For energy-efficient movement of mold core functions and cascades, the PX can be optionally equipped with a compact, servo-hydraulic auxiliary unit. Thanks to the space-saving design of the drive components and optimized machine topology, the machine bed has been shortened. In combination with the slimmer housing, this results in a 20 percent reduction in footprint.
Optimized mold temperature control and digital hot runner control
The options for mold cooling and temperature control have been extensively revised, for example through direct water distribution to the clamping plates. The reduced pressure loss allows the use of smaller temperature control units, which is an additional efficiency advantage. Customers benefit from a wide range of temperature control solutions: from simple designs to digital single-circuit monitoring.
With the new KraussMaffei hot runner control, overall productivity can be significantly increased thanks to digital functions such as booster mode, fault detection, and other smart features.

New MC7 control generation: More performance, more ease of use
The PX marks the launch of the new MC7 control system—a modern, web-based platform with intuitive operation, powerful architecture, and the highest safety standards. It already meets the future requirements of the Cyber Resilience Act (CRA), offering increased protection against cyberattacks and enabling seamless digital connection of the machine. The new, web-based visualization concept impresses with its intuitive user guidance, clear display, and extended functionality. The interface facilitates setup, operation, and maintenance and increases efficiency in everyday production.
Visitors to the K trade fair can experience the performance of the new PX live at the KraussMaffei booth.
Perfection in the smallest of spaces: PX 80 as a production cell for technical applications
The new PX 80 with a clamping force of 800 kN impresses visitors to the KraussMaffei booth as a compact and economical solution for the production of technical components. The PX 80 production cell uses a mold from Wieland Electronic to produce electronic components made of polyamide. An LRXplus linear robot removes the components and places them on an integrated conveyor belt inside the machine enclosure. The CE-compliant system enables significantly higher production density: instead of four machines with linear robots, five systems can be operated in the same space.

PX 200 in cleanroom design produces medical components on a compact footprint
96 inner needle protection caps for insulin pens in just 4.5 seconds: the fast PX 200 for medical technology and a high-performance mold from KEBO AG make it possible. The PX is characterized by its high flexibility for use in clean rooms. Laminar flow boxes and conveyor belts can be easily integrated thanks to the modular enclosure concept – ideal for the demanding production requirements of the medical and pharmaceutical industries. With precision, productivity, and sustainability in a small footprint, this application demonstrates how the new fully electric PX is ideally suited for component manufacturing in cleanrooms.
With the new all-electric PX series, KraussMaffei offers its customers real added value: lower operating and energy costs, higher productivity, and maximum flexibility with minimal space requirements. KraussMaffei thus provides a future-proof and sustainable solution that is perfectly tailored to the requirements of modern manufacturing companies.

https://kraussmaffei.com/en

#Kraussmaffei#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

High-Performance Additives for Engineering Plastics at K 2025

High-Performance Additives for Engineering Plastics at K 2025

For the first time, Brüggemann and its fully integrated Italian subsidiary Auserpolimeri will showcase a wider variety of performance-enhancing additives for polyamides and polyolefins at K 2025. The emphasis will be on innovative advancements that allow for lighter and more intricate designs, satisfy particular needs in the e-mobility and E&E industries, or enable recycling to be used in difficult applications even at high temperatures. These include impact modifiers, thermal stabilizers, and highly effective flow improvers. Additionally, there is a novel additive that produces thermoset-like qualities, particularly at high temperatures, without sacrificing thermoplastic processing for uses like cable, polyolefin foams, and HFFR compounds.
Innovative Solutions for E-Mobility
Electric drives in motor vehicles are increasing the demand for connectors, battery systems, and charging infrastructure, with specific challenges regarding the heat resistance, flame retardancy, and electrical properties of the thermoplastics used. Brüggemann’s additive portfolio offers tailored solutions that OEMs and suppliers are seeking.
BRÜGGOLEN TP-H2217 belongs to a new class of electrically neutral heat stabilizers specifically developed for the requirements of E&E and e-mobility. It increases the continuous service temperature of reinforced polyamides to up to 8,000 h at 170 °C, setting a new industry standard without compromising tracking index (CTI) and flame retardancy.
Highly efficient flow improvers tailored to the requirements of various polyamides complement the broad portfolio. These include BRÜGGOLEN P1507 for aliphatic grades, BRÜGGOLEN P1810 for semi-aromatic grades, and BRÜGGOLEN P2201 for flame-retardant grades. Their addition enables lightweight, thin-walled, and complex component geometries without compromising mechanical properties. The resulting excellent flowability also supports high glass fiber content of up to 60%. Further advantages include shorter cycle times and the associated lower energy consumption.
In addition to additives for polyamides, Brüggemann is expanding its portfolio to include stabilizers for cross-linked PE compounds. BRÜGGOLEN TP-H2431 is a long-term heat stabilizer for applications in T3 and T4 cables. Supplied in pellet form, it is designed for exceptional thermal stability in continuous operation and is suitable for e-beam and Sioplas applications.
BRÜGGOLEN R8897, a new thermal stabilizer for PP-based PCR recyclates, is a new thermal stabilizer developed by Brüggemann specifically to improve the properties of PP-EPDM recyclates used in front-end applications. A benchmark in its class, it is based on an innovative chemical concept that enables particularly good retention of mechanical properties during long-term heat aging. Laboratory tests demonstrate a significantly improved level of retention of Charpy impact strength after heat aging.
Thermoreversibly crosslinked,
Compoback is an innovative additive for polyolefin foams, HFFR compounds, cable applications, and TPEs. Its addition results in high-temperature properties that largely correspond to those of crosslinked plastics (thermosets), while retaining thermoplastic processability for reuse and recycling. Safe and easy to use, Compoback enables a significant increase in processing efficiency without the additional crosslinking step. Its outstanding effect is demonstrated by the example of extruded, physically foamed PE profiles with a square cross-section. In laboratory tests, their surface area shrank by around 75% after 24 hours of storage at 100°C without stabilization. Compounded with Compoback and stored accordingly, the reduction was negligible – similar to conventional permanent crosslinking.
Broad portfolio
In addition to the innovations mentioned above, Brüggemann will be providing information at K 2025 about its extensive portfolio of property-enhancing additives for polyamides, which includes heat stabilizers, impact modifiers, process aids, flow improvers, nucleating agents and additives for polymer chain modification, as well as additives that improve the quality and processability of recycled plastics.
L. Brüggemann GmbH & Co. KG, an independent family-owned company headquartered in Heilbronn (Germany), offers customized solutions in the areas of plastic additives, industrial chemicals, and alcohol. Brüggemann develops and produces, in particular, high-performance additives for polyamides and polyesters, reactive modifiers (primarily MAH-grafted polymers), AP-NYLON , sulfur-based reducing agents, and zinc derivatives. Founded in Heilbronn in 1868, Brüggemann today supplies customers in more than 70 countries and has international subsidiaries in Italy, the USA, and Hong Kong. The company currently employs approximately 300 people worldwide and generates annual sales of over €200 million.

https://www.brueggemann.com/

#Brueggemann#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

Haitian at K 2025: Leveling Up Innovation with Hands-On Advantages

Haitian at K 2025: Leveling Up Innovation with Hands-On Advantages

Haitian International, among the largest global producers of injection molding machines, is launching K 2025 with the theme “Level Up!”—a definitive declaration that highlights the company’s aim to propel its customers ahead with enhanced productivity, adaptability, and forward-looking solutions. With industries responding to increasing demands for efficiency, sustainability, and digitalization, Haitian is positioning itself at the leading edge by merging established machine technologies with intelligent, connected solutions aimed at providing quantifiable benefits on the production floor.

Technology to the Point – Live in Hall 15/A57
At this year’s K Show, Haitian International will demonstrate what “Level Up!” means in practice, with several exciting product premieres and live showcases of advanced injection molding solutions. The highlight will be the all-new, electric fifth-generation Zhafir Zeres F, designed specifically for packaging applications, and the latest generation of Zeres for medical pack production, both representing Haitian’s commitment to high precision, energy efficiency, and application-focused innovation.

On the servo-hydraulic side, Haitian Plastics Machinery will unveil the new high-speed MAV/F Pro Series alongside the two-platen Jupiter Series. These models are engineered for faster cycle times, energy efficiency, and flexibility across a range of applications, from packaging to automotive to consumer goods. Both the Zhafir Zeres Medical and the Haitian Jupiter machines will be fully integrated into Haitian’s MES system “GoFactory,” a smart manufacturing solution that is now included as part of the standard package with every machine. This integration reflects Haitian’s belief that machine technology and digital intelligence must work hand-in-hand to deliver efficiency and transparency across production lines.

The company is also extending its technology portfolio through Niigata Machinery’s electric injection molding machines, now complemented with vertical application solutions. This addition significantly broadens Haitian’s offerings in precision molding for specialized industries such as automotive, electronics, and medical components, providing customers with tailored solutions to meet demanding application requirements.

Unlock Synergies – Expanding Possibilities
Haitian’s motto at K 2025 is not just about incremental improvement but about unlocking synergies across its diverse business units. The Haitian Group operates as a globally networked industrial group with development centers and manufacturing facilities strategically located around the world. This unique structure allows Haitian to deliver not just individual machines but fully integrated turnkey solutions that combine automation, digital intelligence, and precision engineering.

For example, Haitian Precision will demonstrate its advanced CNC machining capabilities, showing how the group’s expertise extends beyond plastics machinery into high-performance industrial solutions. Meanwhile, Haitian Smart Solutions will present its growing range of peripherals and automation technologies. These solutions—spanning robotic handling, integrated cell automation, and auxiliary equipment—enable manufacturers to build complete, efficient, and future-proof production cells that go far beyond injection molding.

By showcasing these synergies, Haitian emphasizes its ability to support customers in optimizing their operations holistically, whether that means lowering cycle times, improving quality control, reducing energy consumption, or meeting stricter regulatory requirements in sectors like packaging and healthcare.

Haitian’s Global Impact and Vision
With over five decades of experience, Haitian International has built its reputation as a leader not only through volume but also through its ability to anticipate customer needs and deliver value-driven solutions. The company’s vast global network—with manufacturing hubs in China, Germany, Vietnam, India, and Turkey, alongside sales and service operations worldwide—ensures that it can respond quickly to regional market demands while maintaining a consistent level of innovation and service.

K 2025, held from October 8–15, 2025 in Düsseldorf, Germany, provides the perfect platform for Haitian to reinforce its leadership position. As the world’s largest trade fair for plastics and rubber, K is the stage where machinery manufacturers, material suppliers, and innovators come together to define the future of the industry. For Haitian, it is an opportunity not just to showcase machines but to demonstrate its integrated vision of “Level Up”—where smart machines, digital ecosystems, and automation converge to deliver real-world competitive advantages.

Visit Haitian at K 2025
Visitors will find Haitian International at Hall 15 | Booth A57, where they can explore the full range of innovations, watch live demonstrations, and connect with Haitian experts to discuss how the group’s technologies can transform their production processes.

With its new premieres, digital integration through GoFactory, expanded electric and vertical solutions, and cross-sector synergies across its business units, Haitian is using K 2025 to underline its commitment to customer success. True to its guiding motto, the company is not only leveling up its own portfolio but also enabling its customers to take their productivity, flexibility, and competitiveness to the next level.

https://www.haitian.com/en/

#Haitian#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

Pernoud To Demonstrate Bi-Material Multitube Overmoulding Technology At K 2025

Pernoud To Demonstrate Bi-Material Multitube Overmoulding Technology At K 2025

At K 2025, the largest trade fair in the world for the plastics and rubber industry, the French moldmaking expert, Pernoud, will highlight its new technological innovation, the Bi-material Multitube one-shot overmoulding process. This patented solution makes it possible to simultaneously mould two different materials in one operation, eliminating traditional downstream post-moulding processes and enhancing the efficiency of the production of tubular complex parts. The live demonstration at Hall 15, Stand B24 will be a key feature of the exhibition, where visitors will be able to see first-hand how advanced tool design and an integrated process can provide cost savings and quality improvements, with modern sustainability in mind.

The Bi-material Multitube process is designed to simplify and streamline the manufacturing of parts that traditionally require multi-step processes such as welding, adhesive bonding, or mechanical assembly. Instead of producing separate components and assembling them afterward, Pernoud’s one-shot system injects both materials—typically a rigid and a flexible thermoplastic—directly into the same mold. The result is a fully integrated, multi-functional part produced in a single cycle. This approach not only increases production speed but also guarantees a more reliable seal between materials, reducing the risk of leakage or failure, particularly in demanding applications.

Industry Applications: Lightweighting and Functional Integration
Pernoud’s technology is particularly suited for industries such as automotive, medical, industrial equipment, and home appliances where multilayer tubular parts are in high volume use. Automotive manufacturers, for example, routinely use complex fluid lines and air ducts that require structural rigidity coupled with functional flexibility. With the Bi-material Multitube process, designers can easily create complex molded parts with flexible soft sealing zones and hard durable connection zones in one mold. In medical applications, a catheter or tubing system can leverage dual-material construction to achieve both pliability and control. By creating these parts in one step, manufacturers create the opportunity to reduce total parts, decreased inventory and shorter assembly times.

What distinguishes this process is the efficiency of combining materials, but also the accuracy and repeatability of the final product. Since both materials are molded under controlled conditions simultaneously, the bond formation is much stronger than through secondary assembly processes, giving a functional integrity to the part and overall flexibility of design—engineers can conceptualize parts with complex geometries or multiple functional zones with little concern for mechanical failures or alignment of components. Moreover, because of Pernoud’s patented design of the mold, the interface between materials is completely sealed and can withstand any pressure, temperature variations, and mechanical stress while retaining strength and performance.

In addition to performance, the economics and eco-friendliness of this process are quite convincing. Avoiding post moulding methods of assembly such as gluing, ultrasonic welding, or manual assembly, reduces the labour force required, decreases the manufacture cycle of the final device, and conserves energy. There are also fewer parts, leading to a lower quantity of mould tooling, less transportation between stations, and less waste (material plus scrap). As global trends increasingly embrace sustainability and lean manufacturing ethos, the one-shot overmoulding solution from Pernoud provides a concrete means in advancing a company’s and industry’s sustainability goals, without compromising product performance or design flexibility.

Pernoud brings decades of expertise to this innovation. With more than 50 years in high-precision moldmaking, the company is known for its advanced tooling systems that support complex injection molding applications. Their molds frequently incorporate rotary indexing platens, in-mold transfer systems, and robot-assisted part handling, providing end users with reliable, high-performance solutions capable of operating 24/7 in high-volume production environments. The Bi-material Multitube technology represents the latest evolution of this engineering excellence—one that addresses both current manufacturing needs and future market challenges.

Live Demo at K 2025: Innovation in Action
At K 2025 visitors will see this technology live int action, molding a complex tubular part from two materials in a single cycle. The machine will have experts from Pernoud on hand to discuss the process, technical details like material compatibility and cycle times, as well as the unique tooling options available for these applications. This demonstration will be valuable whether you’re with a Tier 1 automotive supplier, a medical device manufacturer, or an OEM that is looking for production efficiencies, it will show you how one shot overmoulding can help you re-think your manufacturing approach.

As manufacturers face increasing pressure to cut costs, reduce environmental impact, and deliver innovative designs, the Bi-material Multitube process from Pernoud offers a powerful solution. By combining functionality, precision, and efficiency in a single molding step, it marks a significant advancement in multi-material molding technology.

www.Pernoud.com

#Pernoud#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

Nordmann Highlights Circular-Economy Solutions With Global Partners At K 2025

Nordmann Highlights Circular-Economy Solutions With Global Partners At K 2025 

Nordmann has confirmed its participation at K 2025, the world’s leading trade fair for plastics and rubber, which will take place in Düsseldorf from 8 to 15 October 2025. The international chemical distributor will exhibit in Hall 6 at stand 6E75, together with partners Honeywell, Jiangsu Liside New Material, Marfran and PMC Organometallix. Under the guiding motto “Innovative raw materials for sustainable growth,” Nordmann will present advanced solutions that are designed to support the future-oriented development of the plastics and rubber industries. The company’s presentation at the fair will emphasize its close alignment with circular-economy principles, while also showcasing materials and innovations that enable improved recyclability, higher efficiency in processing, and enhanced competitiveness for manufacturers navigating today’s demanding markets.

For Nordmann, K 2025 represents an important platform to underline its strategic role

in shaping a more sustainable plastics industry. “For me, the circular economy is one of the major challenges and opportunities of our time,” emphasizes Jost E. Laumeyer, Global Director of Plastics Sales at Nordmann. “As an international distribution company, we play a key role in the supply chain and work with our partners to drive the industry’s sustainable transformation. Whether it involves regulatory requirements or the promotion of recycled feedstocks and biobased products, we focus on innovative solutions that help our customers achieve their sustainability goals while maintaining competitiveness.” His comments highlight the company’s dual responsibility: meeting strict new regulatory frameworks while also ensuring customers remain efficient and commercially successful.

At the fair, Nordmann will be represented by an international team of experts drawn from across Europe and its global network. These specialists will be available on-site to engage with customers, suppliers, and industry professionals on a wide range of issues, including application-specific material requirements, regulatory developments, and the growing market for recyclates. This presence underscores Nordmann’s role not simply as a distributor but as a trusted partner providing technical and regulatory expertise. Visitors can also expect detailed partner presentations on topics such as additives for polyolefins, innovative flame-retardant solutions, and TPE-S compounds developed to meet high standards of biocompatibility. These discussions will directly address key areas where the plastics industry is seeking innovation in response to global sustainability demands.

Each of the co-exhibitors on Nordmann’s stand at K 2025 will add a special outlook and product range. Honeywell, in its established A-C brand, will introduce low-molecular-weight additives for polyethylene polymers and copolymers. These grades are particularly suited to solve formulation issues as well as provide concrete advantages such as lower process waste, better recyclability, and increased durability of the product. These traits fit hand-in-glove with circular-economy goals, since they allow converters and compounders to engineer products that are less resource-intensive and simpler to reintroduce into closed-loop systems. Jiangsu Liside New Material, making its first appearance as a Nordmann partner in Europe, will unveil a range of halogen-free flame retardants. In response to increasing regulatory and consumer demands for the phasing out of halogenated solutions, Liside’s flame-retardant products focus not only on a reduced environmental footprint but also on robust technical performance to deliver consistent stability and safety in a variety of polymer applications.

Marfran, a long-standing partner known for expertise in thermoplastic elastomers, will highlight its Marfran.Med TPE-S compound series at K 2025. Among these, the Marfran.Med GLE line stands out as a pioneering solution, as it enables solvent bonding of TPE-S compounds while meeting demanding requirements for both biocompatibility and sterilization. This innovation opens new possibilities for the design of medical devices and healthcare applications where performance, safety, and patient well-being are critical. Completing the group of partners is PMC Organometallix, which will provide visitors with information on the regulatory assessment of stabilizers containing organotin compounds. Given the increasing regulatory scrutiny under European Union legislation, PMC Organometallix’s expertise will be particularly valuable for customers who need to navigate compliance while maintaining performance in their formulations.

Alongside its partners, Nordmann will also place a strong spotlight on its proprietary product brands. These include Norantox, a well-established range of antioxidants and UV stabilizers designed for both virgin polymers and recyclates. Norantox products ensure stability and long-term durability even under challenging environmental conditions, helping customers extend the lifecycle of their materials. Another highlight will be the Nord-min Flame Retardant Masterbatch (FRMB) product line, which features halogen-free flame retardants and synergists suitable for use in polyamide, polycarbonate, and polyolefins. Developed to meet key flammability standards, these solutions address the critical need for fire safety while also aligning with sustainability targets.

The significance of Nordmann’s participation is magnified by the global prominence of K 2025 itself. Held every three years, the Düsseldorf event is widely regarded as the most important international stage for the plastics and rubber industries. It regularly attracts more than 3,000 exhibitors and in excess of 200,000 trade visitors from across the world, creating a unique environment for unveiling new technologies, sharing knowledge, and forging strategic partnerships. The 2025 edition of the fair is expected to put a particularly strong emphasis on sustainability, digitalization, and circular-economy strategies—areas where Nordmann is keen to demonstrate leadership.

By exhibiting alongside established names like Honeywell and innovative partners such as Jiangsu Liside New Material, Nordmann underscores its position as a connector between producers and processors. The company’s role as a distributor extends beyond logistics to include offering technical guidance, regulatory expertise, and strategic advice, ensuring customers are well equipped to respond to market challenges. Its participation at K 2025 will send a clear message that innovative raw materials and intelligent supply-chain strategies are central to enabling sustainable growth in the plastics industry.

Visitors attending K 2025 will find Nordmann and its partners in Hall 6 at stand 6E75, where the international team will be available for detailed discussions, live product demonstrations, and technical consultations. For manufacturers, processors, and brand owners seeking to align with circular-economy principles, meet regulatory requirements, and secure high-performance materials, the Nordmann booth promises to be an essential stop on the exhibition floor. As the industry enters a new era of transformation, Nordmann’s presence at K 2025 will highlight the company’s enduring commitment to helping shape a sustainable future for plastics and rubber.

https://www.nordmann.global/en

#Nordmann#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

Future Makers: K 2025 Encourages Young Talent Through Innovative Programs

Future Makers: K 2025 Encourages Young Talent Through Innovative Programs

With special offers for school pupils, students and young professionals, K 2025 in Düsseldorf is putting the spotlight on the next generation of skilled workers. Under the title ‘Young Talents’, numerous formats will be presented that offer guidance in choosing a career and provide insights into the diverse career paths in the plastics industry.

Guidance and exchange for young talent

The Young Talents initiative is aimed at young people who are interested in training or studying in the field of plastics and rubber technology. The industry offers attractive future prospects – from circular economy and climate protection to high-tech solutions in medicine and mobility. At K in Düsseldorf, from 8 to 15 October 2025, young people and students will receive information on training courses, study opportunities and career prospects.

A look behind the scenes – podcast on the plastics industry

A new offering has already been launched ahead of the trade fair: in the podcast ‘A look behind the scenes – young talents in the plastics industry’, four trainees and students provide exciting insights into their everyday working lives. They talk about their experiences, challenges and opportunities and show how diverse and future-oriented the industry is.

The protagonists, Jacob, Jacqueline, Johanna and Mathias, are also the ones who will be conducting the Young Talents Tour at the trade fair.

Young Talents Tour

A highlight of the trade fair is the Young Talents Tour, during which the four young professionals will guide visitors through various stations on Sunday, 12 October, and present their personal training and study paths. Stops on the tour include the GKV’s Young Talents Lounge and the exhibition stands of the training companies themselves: Arburg, Erema, Covestro and SIMONA. Participation in the tour is free of charge and no advance registration is required. The tours will be conducted in German and will start at the gkv (Hall 8a / Stand F11-01).

Young Talents Lounge

At K 2025, the Gesamtverband Kunststoffverarbeitende Industrie (GKV) is sending a clear signal about training, study and career prospects in plastics processing. As the responsible sponsor of the official special format ‘Young Talents Lounge’, the association is focusing specifically on the topic of promoting young talent. Visitors can experience plastics processing interactively, for example with an obstacle course, VR applications or a mini injection moulding machine. The association will also be presenting innovative courses of study and providing inspiration for promoting young talent. A special event will be the gathering of the winners of the Günter Schwank Prize as part of the ‘Club of the Best’. The award honours the best graduates in plastics technology each year.

Young talent in mechanical engineering

Mechanical engineering also offers young talent a platform at the trade fair: in the VDMA pavilion, which is part of ‘The Power of Plastics!’ Forum, trainees, students and young professionals organise the daily ‘Young Talents Time’ (9 to 14 October, at 11 a.m. each day). Here, ideas for the future of the plastics industry are discussed. In addition, the VDMA also specifically promotes young women in mechanical engineering with initiatives such as EnSHEneer.

Career Sunday

At Plastics Europe Germany, K Sunday is all about young talent. In the official special show ‘Plastics Shape the Future’, Plastics Europe offers a varied programme that addresses issues relating to training, recruiting and career opportunities. This includes a panel on recruiting skilled workers, various expert talks on topics such as ‘Recruiting by Gaming’ and ‘Recruiting by Diversity’, a recruiting stand-up and interactive formats such as ‘HR Bullshit Bingo’. A Science & Poetry Slam rounds off the programme.

Free admission for young people on 12 October

K Sunday is all about young people, which is why school pupils, trainees and students can visit the trade fair free of charge on this day. Proof of eligibility in the form of a pupil or student ID card is required at the Information on tickets | K 2025.

www.k-online.com.

#k-online #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael

Royal Visit to K 2025 Strengthens Strategic Industrial Links with the Middle East

Royal Visit to K 2025 Strengthens Strategic Industrial Links with the Middle East

Royal visit to K 2025: His Royal Highness Prince Saud Turki Al-Faisal Al Saud, Chairman of the Riyadh Exhibitions Company (REC), together with Wolfram N. Diener, Chairman of the Management Board of Messe Düsseldorf, set another milestone in the close cooperation between the two partners. At K 2025, the World’s Leading Trade Fair for Plastics & Rubber, both sides confirmed their strategic cooperation with an official handshake.

Royal visit to K 2025: His Royal Highness Prince Saud Turki Al-Faisal Al Saud, Chairman of the Riyadh Exhibitions Company (REC), together with Wolfram N. Diener, Chairman of the Management Board of Messe Düsseldorf/Credit: Messe Düsseldorf/C. Tillmann

The handshake marks another milestone in the international expansion of the world’s leading trade fairs K, interpack and drupa into Saudi Arabia. There, the dynamic and multifaceted development of the Middle East economy can currently be observed in an impressive manner. The Riyadh Exhibitions Company is organising the Saudi Plastics & Petrochem and Saudi Print & Pack trade fairs there from 12 to 15 April 2026, with over 500 exhibiting companies from the petrochemical, plastics, printing and packaging industries. This rapidly growing quartet of trade fairs, whose number of exhibitors has risen by around 70 per cent since 2018, offers ideal opportunities for Messe Düsseldorf.

The new presence in Riyadh perfectly complements Messe Düsseldorf’s existing international portfolio – in the plastics and rubber sector with ‘K Alliance’, in the processing and packaging segment with ‘interpack alliance’ and in the print technologies sector with ‘drupa alliance’. The aim of the partnership is to actively participate in the growing economic momentum in the Middle East. Both partners had already officially documented their strategic cooperation in a memorandum of understanding in spring 2025.

Numerous points of contact for the Düsseldorf trade fair portfolio

Wolfram N. Diener, Chairman of the Board of Management of Messe Düsseldorf, emphasises the significance of this decision: ‘We are in the right place at the right time. With our commitment to the world’s fastest-growing trade fair market, we are strengthening our position as one of the most successful international trade fair companies. Saudi Arabia and the United Arab Emirates are diversifying their economies, which opens up numerous points of contact for our broad trade fair portfolio and new potential for our customers.’ The fact that the economic transformation of the region is attracting increasing international attention was also demonstrated by a high-ranking visitor: His Excellency Bandar bin Ibrahim Al-Khorayef, Saudi Arabia’s Minister of Industry and Mineral Resources, is currently visiting K 2025. Last year, he already got an impression of the international trade fair scene in Düsseldorf at drupa 2024.

High economic growth in the Middle East

This is reflected in the economic data of the Gulf Cooperation Council (GCC) countries. According to the consulting firm jwc, their annual growth rate of six percent until 2029 exceeds both that of the EU (3%) and the global average (5%).

Building on existing strengths: steps taken in the region to date

The current new business activities are not Messe Düsseldorf’s first steps in the region. Since 2007, K has had a successful partnership with ArabPlast in Dubai. Since 2019, Messe Düsseldorf has been driving its business forward with, among other things, the interpack alliance trade fairs pacprocess MEA and Food Africa Cairo in Egypt – the link between the Middle East and Africa. Since 2024, a new subsidiary has also been complementing Messe Düsseldorf’s global network – in Turkey, which bridges the gap between Europe and the Middle East. The offensive in Saudi Arabia is now the next logical step.

www.k-online.com /www.interpack.com/ www.drupa.com

#k-online #interpack #drupa            #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #PrintMagazine #Modernplasticsisrael