spot_img
Home Blog Page 22

Driving Recycling Innovation Through Active Industry Participation

Driving Recycling Innovation Through Active Industry Participation

Aduro Clean Technologies Inc a clean technology company using the power of chemistry to transform lower-value feedstocks, like waste plastics, heavy bitumen, and renewable oils, into resources for the 21st century, today announced its membership in both the Plastics Industry Association (PLASTICS) and the Polystyrene Recycling Alliance (PSRA), a collaborative initiative of PLASTICS focused on advancing polystyrene recycling solutions.

The PSRA brings together stakeholders from across the polystyrene value chain including resin producers, converters, recyclers, and technology developers to support technical collaboration, data sharing, and infrastructure development. The alliance promotes both mechanical and advanced recycling approaches aimed at improving recovery rates and creating viable end markets for polystyrene materials.

Membership in PLASTICS connects Aduro to a broad network of resin producers, recyclers, converters, and brand owners committed to driving sustainability and circularity in the plastics industry. Through PLASTICS, Aduro will participate in working groups and policy discussions that shape the regulatory frameworks, standards, and infrastructure needed to expand the role of chemical recycling and advanced conversion technologies.

Hydrochemolytic Technology (HCT), developed by Aduro, works with water along with a catalyst at moderate temperatures to cleave carbon–carbon and carbon–heteroatom bonds in polymers resulting in lower-molecular-weight compounds. Unlike other technologies that rely on high thermal input to effect uncontrolled rupture of polymer molecules, HCT operates under gentler conditions enabling controlled reaction pathways. The catalyzed, selective chemistry of HCT results in higher yields of hydrocarbon products with high functional group purity with minimal loss of polymer feedstock to undesired by-products such as char or heavy tar and gases. Experiments conducted on bench and large lab scale flow-through units have demonstrated the applicability of HCT to convert post-consumer polystyrene into defined hydrocarbon intermediates such as toluene, ethylbenzene, and cumene. These outputs are compatible with downstream chemical infrastructure and require no further upgrading. While further development and validation are ongoing, these results underscore the potential of HCT to produce valuable chemical products and intermediates from difficult-to-recycle feedstocks and reflect Aduro’s technical strength in valorization of waste streams.

By joining the Polystyrene Recycling Alliance, Aduro is contributing to a collaborative industry effort focused on addressing the systemic and material-specific challenges of polystyrene recovery, such as limited collection infrastructure, low recycling rates, and public misperceptions. These challenges are central to PSRA’s mission to expand access to and adoption of both mechanical and advanced recycling solutions. Aduro’s early-stage work converting polystyrene into targeted hydrocarbon intermediates using its Hydrochemolytic Technology aligns with the Alliance’s objectives to support innovation, data sharing, and viable end-market development. Participation in PSRA complements Aduro’s broader R&D across diverse plastic and renewable feedstocks and reflects the Company’s commitment to advancing science-based approaches to circularity.

“Polystyrene recovery rates remain low, and we’re joining the Polystyrene Recycling Alliance to explore how Aduro’s chemical approach can help address that challenge,” said Ofer Vicus, Chief Executive Officer of Aduro Clean Technologies. “Our membership in PLASTICS extends that engagement across the broader plastics value chain, allowing us to contribute to policy, standards, and technical collaboration as the industry moves toward more circular solutions.”

“We’re pleased to welcome Aduro as a new member of both the Plastics Industry Association and the Polystyrene Recycling Alliance,” said Patrick Krieger, Vice President of Sustainability at PLASTICS. “Their participation reflects a shared commitment to advancing recycling solutions and building a more collaborative, innovative, and sustainable plastics industry.”

Aduro is currently constructing its Next Generation Process (NGP) Pilot Plant in London, Ontario. Designed to operate under continuous flow conditions, the NGP Pilot Plant will support the evaluation of Hydrochemolytic Technology (HCT) using real-world feedstocks. Its modular and scalable design enables flexibility for project-specific applications across a range of customer needs. Aduro’s participation in the PSRA complements this development by facilitating technical exchange, sample coordination, and closer alignment with evolving industry requirements.

Polystyrene is a widely used plastic with applications in packaging, food service, construction, and electronics. Global production exceeds 40 million tonnes per year, with North America accounting for approximately 3.4 million tonnes. Despite this scale, most post-consumer polystyrene ends up in landfills. According to the Environmental Protection Agency in the United States, less than 6% of polystyrene packaging is recycled. Foam formats like expanded polystyrene (EPS) present particular challenges, with over 3.6 million tonnes of EPS waste generated annually and limited municipal collection.

In Canada, plastic waste totaled approximately 4.4 million tonnes in 2018, with only 8% recycled. Polystyrene recovery rates are especially low—estimated at around 10%—and only 35% of municipalities include EPS in their residential recycling programs, limiting access to recycling services for this material.

https://adurocleantech.com/

#adurocleantech #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Innovative Plastics Solutions Transform Manufacturing Possibilities at K 2025

Innovative Plastics Solutions Transform Manufacturing Possibilities at K 2025

At K 2025 in Dusseldorf, Germany, Dow will highlight the range of its materials science solutions to show how plastics can drive positive change and a more sustainable, customer-focused future under the subject “Generation Transformation.”

“Inspired by this year’s K Show theme ‘The Power of Plastics’, we asked ourselves: who, or what, generates that power? It’s the innovation and collaboration among individuals and organizations, responding to the pressing challenges we face in industry and society. Jointly we are all part of Generation Transformation,” said Stephanie Kalil, commercial vice president EMEA, Packaging & Specialty Plastics, Dow.

“We are inviting the entire value chain to join us in exploring how joint innovation can contribute to enhancing performance and sustainability in packaging and consumer solutions, driving the next generation of mobility, and building places that last.”

Dow’s purpose-built building 04.1, just outside Hall 4 at the very heart of the K Show campus, will contain spacious exhibition areas that bring different facets of Generation Transformation to life. Visitors can explore the latest solutions across Packaging, Consumer, Infrastructure and Mobility segments.

Matching materials with performance

New packaging innovations developed in collaboration with brand owners and converters will be on display alongside Dow’s full range of solutions including mono-polyethylene (mono-PE), bio-circular, circular and post-consumer recycled (PCR) materials that provide enhanced product shelf life, tamper resistance and tear resistance, as well as helping customers prepare for the Packaging and Packaging Waste Regulation (PPWR). This includes the new D-PAK cartons, produced in collaboration with Elopak and Orkla Home and Personal Care (OHPC), which offer a unique mix of circular (recycled) polyethylene and bio-circular (renewable) polymers.

In the consumer sector, Dow will be showcasing its latest collaboration with Guerlain, one of the prestigious maisons of LVMH, the world’s leading luxury brand. Guerlain is utilizing SURLYN REN Ionomers for La Petite Robe Noir perfume caps, which offer the design freedom and transparency required by luxury brands. Also on show will be footwear and accessories from some of the world’s most recognizable brands, demonstrating Dow’s high-performance materials solutions that don’t compromise on style or comfort.

Driving next-generation mobility

Anticipating the upcoming end-of-life vehicle directive, Dow’s MobilityScience will showcase solutions that support Original Equipment Manufacturers (OEMs) in meeting regulatory targets, including the latest developments for automotive seating with EVOAIR Polyolefin Elastomers (POE) based leather, a lightweight alternative leather solution offering a luxurious feel, and INFINAIR Polymers for 3D Loop Technology enabling end-of-life mechanical recycling for seat cushion circularity. A range of products addressing the automotive industry’s focus on lightweighting, circularity and electrification will also be featured.

Building places that last

The breadth of Dow’s cross-segment infrastructure offering will also be showcased at K, with a view to helping reduce greenhouse gas emissions, increase efficiency, and support the industry’s transformation towards a more sustainable, resilient future. With the energy transition at the forefront, Dow will be showcasing solutions spanning from wire and cables to piping and building materials. REVOLOOP Recycled Plastics Resins for cable jackets, incorporating post-consumer recycled (PCR) material, will also be featured at K.

“We have a once-in-a-generation opportunity to redefine plastics as a powerful enabler of sustainable transformation and modern life, “said Abby Turner, sustainability and growth marketing director EMEA, Packaging and Specialty Plastics, Dow. “We are inviting partners from every sector to join us at K to help shape the industry for generations to come.”

https://corporate.dow.com/

#dow #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Nature Inspired Bottling Embraces Eco Efficiency

Nature Inspired Bottling Embraces Eco Efficiency

The Garrotxa area of Spain, in the province of Girona, is famous for its distinctive and dramatic volcanic scenery. Thanks to the existence of over 40 volcanoes, dense forests and green pastures, the environment of this part of Catalonia is essential in the creation of the precious Sant Aniol water, which, in 2024, received the SILVER award for taste and the BRONZE for Design in the first edition of the “FineWaters 2024” International Water Tasting Competition organized by the Basque Culinary Center. The prize bears witness to the clarity and quality from the volcanic setting, which fosters balanced mineralization of water and testifies to the firm’s solid commitment to excellence and nature protection. Sant Aniol is also concerned about the optimisation and innovation of materials employed in packaging, reducing the company’s impact on the environment. Rigorous quality checks and a production system with no human contact, are capable of ensuring a contamination-free bottling and extraction process. Energy consumed in the plant has been 100% green since 2018, through the establishment of a 275-hectare security zone, the Spanish firm also safeguards the water resource from any contaminating activity. The Sant Aniol Spring is found inside the Garrotxa Natural Park, at over 120 metres depth, in a site typified by sedimented lava and volcanic rock that provides the water with purity and fine qualities.

BOTTLES WITH A VOLCANIC SPIRIT

The distinctive, incredibly exquisite design of Sant Aniol’s glass and PET bottles comes from the desire to highlight the features of a product that has been featured in the finest hotels and restaurants across more than 20 countries for more than 15 years and that stands out at the points of sale. In 2015, Spanish artist and designer Martín Azúa created a special bottle for Sant Aniol, the surface of which was inspired by the volcanic rocks of Garrotxa, where the water comes from. This inspired the design of PET bottles made by the EBS 8 KL ERGON stretch-blow molder provided by SMI.

SMI SOLUTIONS FOR SANT ANIOL

Companies in the food sector, are now strongly committed to the green and digital transition and put the well-being of consumers and workers at the center of their production processes. For Sant Aniol, the environment is a primary asset to be safeguarded and, to achieve this goal, the company uses the latest generation technologies capable of maximising energy savings. 15 years after the supply of an SMI stretch-blow moulder of the first-generation SR 8 series, Sant Aniol has once again turned to SMI for the installation of the new EBS 8 KL ERGON model, intended for the bottling line of natural water in 0.33 L, 0.5 L and 1.5 L PET containers. The great advantage of the new plant installed at the Sant Aniol de Finestres plant (Girona) is that it has an efficient system to significantly reduce energy costs. The EBS 8 KL ERGON purchased by the Spanish company uses moulds equipped with the “ReduxAir” system, an innovative solution that allows stretchblow moulding operations to be carried out at lower pressures than those traditionally used. Depending on the characteristics of the preform, the bottle and the working conditions, 15-20 bar is sufficient compared to the 30-35 normally used in this process. This makes it possible to reduce the use of the high-pressure air compressor, with a consequent reduction in electricity consumption.

EBS 8 KL ERGON ROTARY STRETCH – BLOW MOULDER

Functions: stretch-blow moulding of PET bottles of natural water at a maximum speed of 16,000 bottles/hour. Bottles worked: 0.33 L, 0.5 L and 1.5 L cylindrical containers.

Main features :

  • the SMI stretch-blow moulder adopts solutions that ensure energy saving, such as the “ReduxAir” mould and the “AirMaster” air recovery system
  • a plant suitable for the production of lightweight PET containers, which, through an appealing design, reflect the uniqueness of bottled water, promote the brand and minimise environmental impact
  • compact, automated plant equipped with digital intelligence that meets the needs of efficient production and constant monitoring of machine consumption.

ENERGY – SAVING BENEFITS

The EBS 8 KL ERGON stretch-blow moulder is characterised by the presence of an innovative preform heating oven that is extremely compact and equipped with an aluminium diffuser that ensures optimal temperature control to prevent overheating. The energy costs for the production of bottles are also reduced thanks to the presence of energy-efficient IR lamps and heat-reflecting panels equipped with ceramic elements. The stretch-blow moulding module is equipped with a high-efficiency two-stage air recovery system, called AirMaster, which recovers the air from the blowing circuit and thus ensures a significant reduction in compressed air consumption and significant energy savings, thanks to the reduced use of the high-pressure compressor.

BENEFITS FOR ENERGY EFFICIENCY

The EBS KL ERGON stretch-blow moulder supplied to Sant Aniol, is equipped with an energy meter equipped with a digital LCD display, which, through the monitoring of energy consumption, allows the operational efficiency of the plant to be optimised. The meter installed on the machine is used to record and display electricity consumption, voltage, current, and power alternately over a given period. Thanks to these devices, SMI machines can benefit from the services offered by the SMYIOT platform, an interactive database that remotely collects, verifies, processes and enhances all the operating parameters of the plant, both at the level of the individual machine and of the entire production line, in order to improve operational efficiency and energy performance, schedule maintenance interventions and reduce production costs overall.

BENEFITS TO SAFEGUARD THE ENVIRONMENT

The solution developed by SMI to reduce the pressure of the blowing air used in the production process of PET bottles perfectly responds to Sant Aniol’s goal of having technologies that minimize the impact on the environment, thanks to lower electricity consumption by the compressor, savings on energy costs and consequent less air pollution.

The EBS 8 KL ERGON stretch-blow moulder installed at the Girona plant is fitted with stretch-blow moulds equipped with the special “ReduxAir” bottom, which, through special technical and design measures, allows the air between the outer walls of the bottle and the surface of the mould to be released much faster, making it possible to produce rPET/PET containers with lower air pressures. especially:

  • 33 L containers with air pressure at 15 bar
  • 5 L containers with air pressure at 17 bar
  • 5 L containers with air pressure at 25 bar

Of course, this value depends on the characteristics of the preform and the bottle and the working conditions in which the stretch-blow moulding process is carried out. As it is well known, compressed air is produced by a high-pressure compressor powered by electricity, so the lower the level of air compression to be obtained, the less electricity the machine consumes. The special “ReduxAir” end cap was precisely created to allow stretch-blow moulding operations at lower pressures than those usually used (about 35 bar) and to ensure a green advantage to the companies that adopt it.

ACCURATE QUALITY CONTROLS ON MOULDS AND BOTTLES

The great advantage offered by the “ReduxAir” solution proposed by SMI to reduce the compressor’s consumption of electricity can be obtained by applying some design restrictions regarding the shape and characteristics of the container to be blown. Therefore, close collaboration between the customer and SMI engineers is essential to evaluate all the technical elements that may affect the applicability of the “ReduxAir” end cap to the production process of a specific bottle and offer advice on how to achieve the highest quality of the container.

In fact, the appeal of a container also depends on the accuracy and precision, with which the moulds used to produce it are made. Therefore, countless tests and checks are carried out on both moulds and bottles in SMI laboratories to ensure excellent aesthetic results and ensure an efficient production process. The use of sophisticated equipment allows us to perform dimensional checks and tests on the preforms used by the customer, in order to accurately measure the thickness of the same and the homogeneity of the polymer of which they are made. SMI also performs other tests on blown bottles to ensure that the quality of the final product corresponds to the customer’s expectations.

SAVE ENERGY WITH THE AIRMASTER AIR RECOVERY SYSTEM

The AirMaster air recovery system consists of two systems. The first basic system allows you to recover the air that is then used for the pre-blowing and service phase of the machine. Two valves are mounted on each stretch-blow moulding station: the first feeds the recovery system, introducing air into the line of the same, while the second discharges the air that cannot be recovered. In addition, the recovered air is taken to feed the machine’s pre-blowing and service circuit. The working pressure of the pre-blowing and service circuit is managed by two electronic regulators. The second air recovery system complements the first and guarantees further savings in compressed air, because it takes part of the exhaust air and uses it exclusively for the blowing phase. Under certain working conditions, the AirMaster is able to enable reductions in compressed air consumption of up to 30%.

https://www.smigroup.it/

#smigroup #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Hits Historic 600 Million Bottle Production Mark in Aseptic PET Packaging

Hits Historic 600 Million Bottle Production Mark in Aseptic PET Packaging

Sidel and Hauser Weinimport celebrate 15 years after installing Germany’s first Combi Predis for aseptic PET packaging

One of the first producers to employ Sidel’s Combi Predis for aseptic PET packing using unique dry preform sterilization technology was Hauser Weinimport. After more than 15 years of operation, the line has flawlessly produced more than 600 million bottles, providing the producer with operational and product reliability.

Hauser Weinimport is a family-owned business that was established in the 1950s and is headquartered in Bavaria, Germany. Originally producing liqueurs and vermouths, the company today primarily offers non-alcoholic soft drinks and flavor-infused teas in PET bottles under the flagship brands Pacific Wave, Bio Eistee, and Eistee Premium. Hauser is a well-known beverage industry leader and dependable copacker for a variety of brands.

“Hauser Weinimport is always looking at trends and striving for innovation. This is what we found in common with Sidel” said Ms. Mayer, CEO at Hauser Weinimport.

Manufacturing flexibility

The aseptic line, installed by Sidel at its Fischbach plant, offers the beverage producer total flexibility with an ability to fill different tea flavours and the signature Sangria beverage, El Curador. The line can operate at 18,000 bottles per hour in the 0.5L format, as well as handle 1L and 1.5L bottle formats.

“When the thread neck diameter remains unchanged, as it does with many of our products, our highly trained operators can complete product changeovers quickly, minimising system downtime,” comments Florian Kotnig, Head of Production at Hauser Weinimport.

Pioneering aseptic Predis technology

Hauser’s line was the first to utilise Sidel’s patented Predis dry preform sterilisation in Germany which works by using hydrogen peroxide mist to sterilise the preform before it enters the oven to be blown into a bottle; packaging remains aseptic without the need for rinsing with water or any other chemicals.

Thanks to Sidel’s cutting-edge technology, the aseptic line has provided Hauser with guaranteed product quality, ensuring smooth operations and consumer confidence.

“The fundamental advantages of this state-of-the technology include its optimal filling conditions and food safety for our beverages, low operating costs, resource savings and its compact design”, explains Florian Kotnig.

Strong partnership

“From the beginning the system was well thought out, fitting within a compact footprint and designed for durability. Sidel is committed to delivering top-tier support to ensure the reliability of the Aseptic Combi Predis, continuously modernising production with innovations like new bottle formats and converting lines to tethered caps,” adds Florian Kotnig.

“We have enjoyed consistent performance and long-term operational efficiency over the years thanks to Sidel’s comprehensive maintenance services and advanced care systems. Based on preventive planned maintenance, Sidel technicians run regular diagnostic checks on our machinery when in operation and during maintenance, creating reports and measures to ensure the line remains running at peak performance. We can always count on Sidel’s support 24 hours a day, seven days a week, via remote access or by phone.

“Above all, product quality is a must for Hauser and it is with this in mind that we originally installed the aseptic packaging line from Sidel. The close working relationship between Sidel and Hauser contributes to the maximum productivity with minimum operational interruptions.”

https://www.sidel.com/en

#Sidel #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Urgent Waste Issues Drive Strategic Talks Ahead of Major Recycling Event

Urgent Waste Issues Drive Strategic Talks Ahead of Major Recycling Event

The second roundtable series was successfully held by Media Fusion and Crain Communications on June 27 in New Delhi as the sector prepares for the Bharat Recycling Show 2025. A panel of distinguished experts and stakeholders from all around India convened for the session to discuss two urgent issues in the recycling ecosystem: end-of-life battery management and e-scrap.

The Roundtable provided an essential forum for talking about government programs, the application of policies, EPR rules, and the real-world difficulties in managing spent batteries and e-waste in a sustainable and safe manner.

The session featured participation from key voices in the sector, including L. Pugazhenthy, Executive Director of the India Lead Zinc Development Association; Satish Sinha, Associate Director at Toxics Link; Sanjeev Srivastava from NAMO eWaste; Ashok Kumar Thanikonda, Senior Program Officer, Global Green Growth Institute; Rakesh Mallick, CEO of E-Waste Recyclers India; Gautam Mehra, Chief of Innovation and R&D at OpenGate Global Enterprises; Akshit Jain, Founder of Recyclify; Preeti Tiwari, Head of Business Development EPR,  Landbell GreenForest Solutions; Pallas Chandel, Climate Change Advisor, GIZ; Mitradev Sahoo, Program Associate – Electric Mobility Sustainable Cities and Transport, WRI India; Arvind Sharma, Senior Director (IT) at the Ministry of Corporate Affairs; and Kuldeep Bartariya, Director at Shreeji Academy and Member of Vidyanjali, Ministry of Education.

The panel unanimously recognised that India’s rapid growth in digital infrastructure, electric mobility, and smartphone adoption has led to an alarming increase in e-waste and battery waste. However, this growth has not been matched with adequate systems for collection, traceability, and environmentally sound disposal.

Mr. L. Pugazhenthy, Executive Director of the India Lead Zinc Development Association, highlighted “The fragmented and largely unregulated collection of batteries in India remains a key concern. While lead-acid batteries used in vehicles and inverters are relatively traceable, dry cells, button cells, and lithium-ion batteries often end up in informal scrap channels or are improperly discarded. Weak enforcement of battery waste regulations and poor compliance by smaller manufacturers further contribute to large-scale environmental leakage.”

“The diversion of used lead batteries to the informal sector continues largely due to unchecked practices by dealers. While the Battery (Management & Handling) Rules, 2001 define responsibilities for various stakeholders, they fall short in clearly outlining obligations for dealers—giving them a virtual free hand. ILZDA has raised this regulatory gap with the CPCB, but action on the matter is still awaited.” he further added.

Mr. Satish Sinha, Associate Director, Toxics Link, echoed the concern, stating that “Despite the presence of well-framed rules, the absence of stringent enforcement, effective penalties, and coordinated monitoring continues to enable non-compliant practices.” The panelists highlighted the issue of government auctions often being accessed by intermediaries or informal players, defeating the objective of responsible recycling.

India’s e-waste management market, valued at USD 2.96 billion in 2024, is projected to reach USD 8.92 billion by 2033, growing at a robust CAGR of 12.07% from 2025 to 2033. As the third-largest producer of e-waste globally—accounting for nearly 10% of the world’s total output—India faces a pressing need for sustainable e-waste disposal. Rapid urbanization, rising electronic consumption, and increased environmental awareness are driving demand for efficient collection and recycling infrastructure, making safe e-waste management a national priority.

Ms. Preeti Tiwari, Head of Business Development EPR, Landbell GreenForest Solutions, drew attention to the 2022 Battery Waste Management Rules and emphasised that while the EPR framework is a significant move, its success depends on a well-defined reverse supply chain, ongoing monitoring, and active responsibility from manufacturers.

Mr. Gautam Mehra, Chief of Innovation and R&D, OpenGate Global Enterprises, said “Battery and e-waste recycling involves hazardous components, complex dismantling, and often lacks sufficient infrastructure. The importance of transparency, proper collection systems, and traceability, without which responsible recycling becomes extremely difficult to enforce.”

Mr. Akshit Jain, Founder of Recyclify said “The most informal recyclers, despite handling a significant volume of waste, do not disclose or document their processes, leaving major gaps in national-level data.”

Mr. Mitradev Sahoo, Program Associate – Electric Mobility, Sustainable Cities and Transport at WRI India, and Mr. Ashok Kumar Thanikonda, Senior Program Officer at the Global Green Growth Institute, shared insights on best practices from other countries in e-waste management and showcased how data plays a crucial role in driving effective solutions.

Ms. Pallas Chandel, Climate Change Advisor at GIZ, brought a unique perspective by mentioning “The rural and peri-urban regions, despite their increasing usage of electronic devices, are often left out of formal waste collection systems. In the absence of basic infrastructure, electronic waste is frequently burned, leading to severe air and water pollution.” She advocated for decentralised collection models, targeted training for informal rural workers, and a more inclusive EPR framework that extends to non-urban India.

Mr. Sanjeev Srivastava, CEO, NAMO eWaste, emphasized “The absence of financial incentives continues to be a major constraint for India’s recycling sector. Introducing targeted support for formal players can serve as a catalyst, encouraging more start-ups and MSMEs to adopt advanced technologies for critical mineral extraction. This, in turn, will pave the way for improved infrastructure, higher compliance, and a more robust circular economy.” 

The panelists collectively called for stronger rule enforcement, real-time traceability, and the integration of the informal sector into formal systems. They also recommended mandatory audits, enforcement of minimum pricing to curb undercutting, and greater public awareness. There was a clear consensus on the need to bridge regulatory and infrastructure gaps to make battery and e-waste recycling safe, traceable, and sustainable.

Bharat Recycling Show 2025, is scheduled to take place from 13 to 15 November at Hall 6, NESCO Exhibition Center, Mumbai. With a focused commodity showcase and high-level discussions, the event aims to accelerate India’s recycling ecosystem and drive long-term industry transformation.

https://www.bharatrecyclingshow.com/

#BharatRecyclingShow2025 #Modernplasticsindia #Pasticsnews
#ModernPlasticsIndiaMagazine #PrintPublication #ModernPlasticsIsrael

Breakthrough in Mould Insert Coding Ensures Repeatability and Speed

Breakthrough in Mould Insert Coding Ensures Repeatability and Speed

With the new InsertKey Z088/…, HASCO introduces an innovative solution for the clear and unambiguous coding of mould inserts in injection moulding tools — a practical answer to one of the industry’s ongoing challenges. This new system, comprising the sleeve Z0881/… and the bush Z0882/…, reliably ensures that mould inserts can only be installed in one correct position. This not only eliminates the risk of insert mix-ups but also streamlines production workflows and boosts confidence in mould assembly processes.

One of the standout advantages of the InsertKey system is its contribution to process reliability, operational efficiency, and greater standardization in modern mouldmaking. By ensuring that every insert is precisely and consistently positioned, manufacturers can significantly reduce human error during assembly and maintenance. This is especially valuable for companies working with high-cavity tools or multi-variant inserts, where even minor mistakes can lead to costly downtime or defective parts.

The InsertKey’s design cleverly enables the identical, repeatable production of mould inserts. Tasks such as work preparation, storage management for spare parts, and regular maintenance routines all benefit from this standardization — reducing lead times, optimizing inventory, and supporting lean manufacturing goals.

The system’s clever coding method is based on specific rotation within the installation space. Depending on the mould concept, only a single code in the mould frame plate is needed for each insert, with the InsertKey automatically positioning each one correctly. This intuitive approach removes the need for additional markings or manual alignment, saving time on the shop floor while providing robust process security.

Its scalability is another important advantage: by using two InsertKey units, each with eight unique rotational positions, mouldmakers can create up to 64 clearly defined coding combinations (8²). This means the system can easily accommodate a wide variety of tool layouts and cavity numbers, providing maximum flexibility while maintaining a compact footprint. The InsertKey requires no additional installation space or protruding parts, allowing seamless integration even in tight tool designs.

Beyond its technical features, the InsertKey is a practical extension of HASCO’s commitment to delivering standardized, user-friendly solutions that add real value. For toolmakers and processors alike, it means faster set-ups, fewer errors, more reliable spare parts management, and simpler maintenance — all contributing to lower operating costs and improved overall efficiency.

With the launch of the InsertKey, HASCO continues to strengthen its position as a trusted partner for precision mould components. This system is yet another step towards the company’s goal of enabling more efficient, reliable, and future-ready injection moulding processes through smart, practice-oriented innovations that respond directly to the everyday needs of the mouldmaking industry.

www.hasco.com

#hasco #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Cloud Based Platforms Enable Secure, Transparent Extruder Performance Tracking

Cloud Based Platforms Enable Secure, Transparent Extruder Performance Tracking

The Coperion C-BEYOND digital platform has been used by Remscheid, Germany-based masterbatch maker colorplasticchemie Albert Schleberger GmbH (cpc) to improve its ZSK twin screw extruders, ensuring long-term optimal efficiency for both the extruders and the entire production process. This technology logs every ZSK extruder’s operating parameters at CPC in a cloud, making them instantly accessible for insightful analysis.

The OEE (Overall Equipment Effectiveness) value of each ZSK extruder as well as the plant as a whole can be found at any time using C-BEYOND. Additionally, the cpc platform supports order planning. Real-time production amount data is accessible. C-BEYOND allows for detailed documentation of the production process and optimal scheduling of maintenance tasks. Furthermore, C-BEYOND computes CO2 emissions and energy usage per kilogram of masterbatch generated. The information it captures greatly speeds up and improves Coperion’s remote servicing effectiveness.

The C-BEYOND digital service platform is an important component of cpc’s production planning. At any time, ZSK extruder operating personnel can enter data on the production status to the system.

OEE dashboard: clear overview of extruder performance

“We produce exclusively tailor-made products for our customers on our ZSK extruders. Production quantities from 25 kg on up are possible. Within a single day, the masterbatch recipes have to be changed frequently. And precisely for this reason, forward-looking order planning and the shortest possible machine downtimes between tasks are critical for our production efficiency – and for our success,” according to Rüdiger Kaczka, Plant Manager at cpc.

By upgrading its ZSK twin screw extruders with the C-BEYOND platform, cpc has taken an important step towards increasing its overall production efficiency.

The heart of C-BEYOND is an all-encompassing data platform that enables valuable analysis of production processes. At any time, cpc can access all production data from its ZSK lines instantly and transparently. Customizable dashboards summarize all plant efficiency data and visualize it in reliable, user-friendly analytical diagrams. Key production indicators (KPIs) for each line, including availability, production quantity and product quality, are easily accessible at a glance. This enables the seamless operation of machines and allows for the identification of trends, which can be leveraged to implement optimization measures.

“In the past, we often pulled together various statistics, calculation tools and our years of experience in order to make production-related decisions. With C-BEYOND, we can access valid data in one place that gives us the certainty that we are on the right track,” Kaczka said enthusiastically.

Order planning: live view and downtime tracking for high efficiency

A look at production planning demonstrates how cpc integrates the C-BEYOND service platform into its workflow and profits from it. Especially in the case of frequent order changes, it is crucial for the entire plant’s efficiency that extruders do not stand idle unnecessarily, or are warmed up without producing anything. Using C-BEYOND, cpc can see precisely when an order will be finished on every one of the ZSK extruders, and can promptly initiate preparations for the following order, ensuring seamless transfers between tasks and full exploitation of every machine.

With C-BEYOND, important ZSK extruder performance markers, such as availability, production quantity and product quality, are determined in real time and visualized in user-friendly OEE analysis diagrams.

C-BEYOND automatically accounts for production interruptions due to recipe changes, maintenance tasks, or other operational downtimes, providing the operational personnel the option to add additional useful information via tablets installed at the extruder. This downtime tracking enables evaluations over longer time periods, which in turn can reveal informative trends, allowing for implementation of measures to increase efficiency in the future. The system continuously documents which order was produced on which extruder, making the production process visible in detail. This data is helpful for claim management and can be used to optimize subsequent orders.

In case of machine breakdown or deviations in the operating window, C-BEYOND can automatically notify management and operating personnel, enabling even faster reactions.

Sustain app: for less energy consumption 

“We take our responsibility for humanity and the environment very seriously”, said Alexander Schleberger, Managing Director of cpc. “For that reason, we use the Sustain app with the energy monitoring function to capture precise real-time information about our extruders’ energy consumption and individual aggregates such as motors, feeders or barrels. On this basis, we identify components and processes that consume a lot of energy and implement data-supported optimization measures.”

If all production lines are integrated into the system, C-BEYOND can capture and monitor energy consumption across the entire facility. Inefficient equipment or even energy waste can be reduced to an absolute minimum so that valuable resources are used exclusively in a targeted manner and a strategic plan for optimal energy use is possible.

“We are supporting cpc by connecting the ZSK extruders to C-BEYOND in order to structure production processes and the machines’ capacity more transparently, increasing efficiency in operation. For us, cpc’s digitization initiative confirms the added value that C-BEYOND can offer. We are convinced that will be a groundbreaking tool in the long term, helping customers achieve increases in productivity and sustainability. It makes us very proud to be able to travel this path together with cpc, and we look forward to continuing our collaboration,” said Markus Schmudde, Head of Research & Development, Compounding & Extrusion at Coperion.

www.coperion.com

#Coperion #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Digital Edge and Green Engineering Raise Bar for Manufacturing Excellence

Digital Edge and Green Engineering Raise Bar for Manufacturing Excellence

The Greenline concept for BO systems aims to maximize efficiency. The core elements are

  • Solutions for PCR use: After years of R&D projects, with the aim of significantly increasing the proportion of recycled polypropylene in the production process for BOPP films, a milestone has been reached in close cooperation with the entire value chain to further close the loop for BOPP films.
  • Direct fluff dosing: Higher production/material efficiency with an advanced solution to increase direct fluff dosing. New software solutions now allow the maximum possible amount of production waste to be fed inline into the BO process at any given time. This also reduces energy consumption as this waste does not have to be re-granulat
  • Heat recovery unit 2.0: This solution maximizes energy efficiency and significantly reduces operating costs by capturing and reusing waste heat more effectively than ever before. The energy-rich exhaust air is fed into the heat recovery unit, where thermal energy is transferred to the fresh air drawn in via a special heat transfer medium.
  • Exhaust air purification system integrated into the BO process from a single source and ideally coordinated. In the first stage, the exhaust air is cleaned using a scrubber; in the second stage, gaseous hydrocarbons are separated from the exhaust air using an electrostatic precipitator.
  • High-temperature heat pump to improve waste heat recovery. This patented solution uses waste heat after passive heat recovery at a low energy level and raises it to a usable energy level. This reduces operating costs and significantly improves the CO2 balance.
  • 12m line concept: Increased productivity and efficiency for the lowest specific energy consumption.

Digitalization: Standard Data Interface (SDI)

Plug-and-play connection of Brückner stretching lines to the customer’s own IT systems. The benefits:

  • Seamless integration of plant data into customer systems such as dashboards, production planning or ERP using a simple and efficient connection.
  • Reduced complexity thanks to simplified IT architecture with just a single interface to all relevant data from a Brückner film stretching line.
  • Fast implementation of data and protocols by using the OPC UA standard.
  • High reliability: Elimination of potential sources of error by standardizing the protocol and the data read out.
  • Availability for every stretching line generation: Simple upgrade for older lines by Brückner Servtec.
  • The standard also allows the connection of lines from other manufacturers.

New solutions for the production of technical films

  • Lines for battery separator films with 8.7 m usable film width: the widest separator film lines in the world with an annual output of up to 500 million m² and with consistent film quality
  • Sequential and simultaneous lines for capacitor films and current collector films with a line width of up to 8.4 m for EV applications or films with high energy density for renewable energy applications in the energy industry
  • Extremely thin films down to 2 microns

Future. Made by Brückner Group

As part of a world-leading group of companies, Brückner Maschinenbau builds on a strong foundation of shared expertise and innovation. United by a common vision, the Brückner Group aims to shape global markets and the future of plastic and material processing with sustainable solutions – flexible, fast and customer-focused. To make this shared purpose tangible, the Group and its business units will be represented together at a joint stand for the first time. This presence offers customers and stakeholders the opportunity to experience the combined strength of leading global companies in the fields of plastics and alternatives, packaging and technical applications, machinery and production plants, as well as holistic solution providing.

Each business unit contributes cutting-edge technologies for future-oriented markets that embody the Brückner Group’s collective commitment to sustainability, digitalization, and technological leadership. From more efficient production technologies and smart automation to new packaging approaches and digital interfaces – these developments reflect the shared drive to lead with purpose.

Together, they stand for collaboration, excellence, and a bold vision: shaping the industry of today and tomorrow.

https://www.brueckner-maschinenbau.com/

#brueckner-maschinenbau #Modernplasticsindia #Pasticsnews
#ModernPlasticsIndiaMagazine #PrintPublication #ModernPlasticsIsrael

Digital and Flexo Technologies Push Label Printing Closer to Broader Packaging Applications

Digital and Flexo Technologies Push Label Printing Closer to Broader Packaging Applications

Comexi, a world leader in printing and converting solutions for flexible packaging, is expected to make a big effect at LabelExpo Europe 2025, which will be held in Barcelona from September 16–19. The company will launch a new technology solution from booth 5G73 that pushes the limits of label printing and conversion—faster, more customized, and more environmentally friendly. Comexi is the only business in the industry that provides flexible packaging and label printing solutions in offset, flexography, and digital formats, customizing technology to meet the unique requirements of each client.

The new Comexi D4 digital press, which is intended to unleash unrestrained creativity, is at the center of this revolution. This technology reduces time to market significantly by doing away with the need for plates and allowing for real-time design adjustments, making it perfect for small batches and fully bespoke designs. Because of its versatility, label creation is redefined for brands that require distinction and immediacy.

Another key innovation is the Digiflex digital press, specializing in variable code printing for critical applications such as traceability, brand protection, and advanced personalization with QR or data matrix codes. It is a strategic tool for brands seeking smart, secure consumer engagement.

Comexi also reinforces its leadership in central drum offset printing with the Comexi CI Offset evolution—a perfect solution for multiple SKUs and short runs that combines outstanding quality with a strong environmental commitment. The technology reduces solvent use and minimizes emissions, providing a highly sustainable alternative for an increasingly demanding market.

In the field of slitting, Comexi will showcase its turret slitter rewinders S1DT and S2DT, capable of slitting reels from 30 mm and integrating with fully automated end-of-line systems. These solutions maximize productivity and meet the growing need for efficiency and precision in label converting.

F4 Origin: A New Generation of Compact Flexographic Presses

Innovation continues with the premiere of the Comexi F4 Origin, the fourth generation of an iconic model introduced in 2010. Since then, Comexi has sold over 100 units of the F4 in its previous three versions, cementing its place as one of the most successful compact presses on the market. This new version maintains the essence of its predecessors—compact format, agility, and versatility—but takes a qualitative leap in performance, efficiency, and sustainability.

Designed for flexible small-format productions, the new F4 Origin now reaches speeds of up to 400 m/min and a maximum width of 1,120 mm, thanks to a fully reinforced mechanical structure. It incorporates the GeniusRun system to eliminate bouncing, ensuring exceptional print quality even at minimum formats of 240 mm.

Additionally, the GeniusDry drying system has been optimized to work with both solvent- based and water-based inks, further supporting sustainability. This redesigned system also brings major energy efficiency improvements by minimizing temperature loss and optimizing airflow between colors to reduce circulating air volume.

In line with Comexi’s more advanced models such as the F2 Origin and F1 Evolution, the F4 Origin now integrates the control console into the machine, reducing the footprint and improving usability. The upper walkway and access points have also been completely redesigned, significantly enhancing ergonomics—making it easier for operators to access the drying tunnel, central drum, video system, and threading, while also facilitating maintenance.

This new generation is ideal not only for short-run flexible packaging but also for the label sector, whose production needs often align with flexographic technologies. Its 240 mm minimum format enables jobs to be printed without duplicating plates, and its compact size makes it a perfect choice for label printers looking to expand into flexible packaging. With this machine, it’s possible to transition from printing a label for a glass or PET bottle to formats such as recyclable monomaterial stand-up pouches, opening up new market opportunities for brands focused on sustainability and diversification.

A day of Networking and Live Demonstrations to Expand to new markets

To experience all these solutions firsthand, Comexi invites its customers to visit its Technological Center at headquarters in Girona on September 15. The company will host a special presentation of the F1 Evolution, its most advanced flexo press. Three live demos will showcase the machine’s capabilities: a solventless job printed at maximum speed with no bounce, a high-definition design using water-based inks, and a third demo with electron beam technology—highlighting how innovation and sustainability go hand in hand.

www.comexi.com

#comexi #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael

Top Circular Economy Conference Set to Expand Impact in March 2026

Top Circular Economy Conference Set to Expand Impact in March 2026

After its grand premiere in March 2025, the planning is now underway for the next Circular Valley Convention (CVC). On March 11 and 12, 2026, the legendary Areal Böhler in Düsseldorf will again become a buzzing hub of experts and thought leaders from business, science, policy, and civil society who share a common objective: accelerating the global transformation towards a genuinely circular economy.
The CVC is already established as one of Europe’s most progressive events for the circular economy, convening the most influential stakeholders who understand that the future of sustainable development lies in reimagining the way resources are used, reused, and recovered. Riding on the success of its first year, next year’s edition will further broaden its scope and influence by highlighting the newest innovations and strengthening connections between sectors and fields.

The core idea behind the Circular Valley Convention is to bridge vision with action. It combines a high-level conference program with an interactive exhibition and curated networking opportunities that encourage meaningful dialogue, practical learning, and concrete partnerships. Attendees can expect an atmosphere where leading researchers, policymakers, corporate leaders, startups, and community pioneers come together not just to talk about circularity — but to demonstrate real-world solutions that can be implemented at scale.

During the first iteration of Circular Valley Convention 2025, attendees learned from global experts and thought leaders on stage. Visionary approaches and breakthroughs were discussed throughout all five stages of the product lifecycle and materials — from sustainable design fundamentals and regenerative material selection to digital tracing and advanced recycling technologies. Over 200 visionaries, such as Prof. Holger Hanselka (Fraunhofer), Katja Busch (DHL), Ulrike Sapiro (Henkel), and Prof. André Bardow (ETH Zurich), connected with a varied crowd of attendees via motivating keynotes, interactive panels, and detailed masterclasses on three specialized stages.

For 2026, the CVC will double up on its vision to be the world’s top international trade fair and knowledge leadership platform for the circular economy. The expo floor will expand into an even fuller marketplace for advanced circular solutions, with everything from new materials and modular product design to intelligent reverse logistics systems and fresh business models for reuse and remanufacturing. This interactive space will allow people to experience how cross-sector collaboration can speed up systemic change.

Yet another characteristic of the Circular Valley Convention is its focus on effective networking. Since a circular economy cannot be successful in silos, the event will further enable connections that cut across value chains and geography. Startups will get to interact with potential partners and investors, researchers will get a chance to meet practitioners directly, and policymakers will learn from the experience of actual pilots and market leaders.

A key strength of the CVC is its close ties to the broader Circular Valley ecosystem — an internationally recognized initiative based in Germany’s Rhine-Ruhr region that brings together companies, research institutions, and policymakers to pilot scalable circular economy projects. By rooting the convention within this ecosystem, the CVC ensures that insights and partnerships formed at the event can translate into practical, impactful action long after the expo halls close.

As the world races to reduce waste, conserve finite resources, and cut carbon emissions, gatherings like the Circular Valley Convention play a critical role in aligning goals, standards, and best practices across borders. The 2026 edition will place an even stronger spotlight on collaborative innovation — showcasing success stories that span industries such as packaging, textiles, construction, electronics, and mobility. Attendees will gain practical ideas for integrating circularity into product design, supply chains, business models, and consumer engagement.

Save the Date: March 11–12, 2026 at Areal Böhler in Düsseldorf. Whether you’re a corporate sustainability leader, a researcher breaking new ground in materials science, a policymaker drafting circular economy frameworks, or an entrepreneur developing circular business models, the Circular Valley Convention promises to be a dynamic hub of solutions, inspiration, and connections for everyone ready to shape the circular future.

https://cvc-duesseldorf.com/

#CVC2026 #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #ModernPlasticsIsrael