spot_img
Home Blog Page 4

Christina Slopek-Hauff Receives Major Industry Honor At Drupa Prize 2026

Christina Slopek-Hauff Receives Major Industry Honor At Drupa Prize 2026

The drupa Prize 2026 has been awarded to literary scholar Christina Slopek-Hauff for her outstanding doctoral thesis in the field of English and American Studies. With her thesis “Plural Psychologies: Interrogating Mental Illness in Anglophone African and African-Diasporic Fiction”, she makes an innovative contribution to interdisciplinary literary and cultural studies. With this prize, drupa annually supports outstanding early-career researchers from the Faculty of Arts at Heinrich Heine University Düsseldorf.

 

The drupa Prize, worth 6,000 euros, was presented on 7 May 2026 during a formal ceremony at the exhibition grounds in Düsseldorf. The presentation was attended by Wolfram N. Diener, Chairman of the Management Board of Messe Düsseldorf, Sabine Geldermann, Director of the drupa Portfolio Print Technologies, Prof. Dr Heidrun Dorgeloh, Vice-Rector of Heinrich Heine University Düsseldorf, Prof. Dr Ulli Seegers, Dean of the Faculty of Arts at Heinrich Heine University Düsseldorf, and her supervisor, Prof. Dr Birgit Neumann.

Dr Andreas Pleßke, Chairman of the drupa Committee, paid tribute to the award winner: “Christina Slopek-Hauff’s work exemplifies research that transcends disciplinary boundaries and brings global perspectives to light. Particularly in a time of profound transformation, including within our industry, such nuanced, intercultural approaches are crucial for understanding complex interrelationships and developing new ways of thinking.”

Interdisciplinary contribution to literary and cultural studies

Christina Slopek-Hauff (centre) was awarded the drupa Prize 2026.

In her dissertation, awarded a summa cum laude, Christina Slopek-Hauff analyses literary texts as spaces in which dominant, often Western-influenced concepts of psychology and mental health are critically questioned and expanded. In doing so, she combines approaches from the Medical Humanities, Disability Studies and Postcolonial Studies. The work demonstrates how literature helps to make diverse (“plural”) perspectives on mental health visible and to challenge hegemonic structures of knowledge. In doing so, it makes both an academic and a societal contribution to the current debate on diversity and cultural perspectives on health.

drupa.com/

#drupa.com/ #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

 

High-Safety Lightweight Youth Bikes Powered By WIT And Hot Runner Expertise

0

High-Safety Lightweight Youth Bikes Powered By WIT And Hot Runner Expertise

Setting new industry standards, the li:on youth bikes from Kids Bike Revolution in Markdorf combine high safety and stability with low weight as well as sustainable manufacturing and design. A key feature is their frames which come in two sizes. They are made of Fibrit, a polyamide reinforced with 40% recycled carbon fibers that is lightweight and recyclable. Weber Fibertech, which is also based in Markdorf, produces the frames using modified water injection technology (WIT) and its patented E-LFT process, as well as FLEXflow HRS servo-driven hot runner technology from Oerlikon HRSflow. PME fluidtec, a Weber Fibertech subsidiary and a leading global supplier of machines and injection systems for fluid-assisted injection molding based in Ettenheim, Germany, developed the WIT. KraussMaffei manufactures the MX 1600 injection molding machine, which is specifically designed for this application.

In the WIT process, the mold is first filled with molten material. Immediately afterward, a water jet strikes the still-liquid core of the part in the opposite direction of injection, forcing excess material back into the injection molding machine’s melt supply. This saves material without reducing the rigidity of the tubular frame. However, it requires very complex control of the opening and closing of the injection nozzles in both phases of the WIT. FLEXflow HRS meets these requirements and was therefore key to the project’s success.

FLEXflow HRS as a key

In line with the requirements of WIT technology, the hot runner system used to manufacture the frames for li:on Bikes features a highly complex design. Oerlikon HRSflow

Compared to conventional hot-runner injection molding, the combination of WIT and hot-runner technology, together with the flexible control unit of the servo-driven FLEXflow HRS systems, offers significant advantages. It enables independent and precise adjustment and monitoring of the needle stroke positions as well as the movement speeds of all nozzles integrated into a mold. This allows for precise control of the opening and closing cycles as well as melt flow, compensates for different flow paths, and enables the targeted positioning of weld lines. This flexibility is available both during injection into the cavity and during the WIT-specific push-back of the molten material for direct use in the subsequent cycle. Separate overflow cavities are not required, eliminating the material loss otherwise associated with them.

For both frame sizes of the li:on bikes, four injection points on the rear fork have proven to be optimal. There, nozzles from the Wa series from Oerlikon HRSflow, which are designed for medium to high shot weights, allow for short injection times. They are made of a highly wear-resistant special steel and thus withstand the demands of processing the abrasive, carbon-fiber-reinforced polyamide.

Friedbert Schmitt, Managing Director of Weber Fibertech, comments: “Thanks to FLEXflow HRS hot runner technology, we can use the WIT for series production and deliver top-quality lightweight frames for the li:on youth bikes. Even at first glance, these closed, multidimensional hollow profiles impress with their perfect surfaces and lack of warping. Despite varying flow paths and cross-sections, their individual areas are completely and uniformly filled and securely sealed at the end of the process. Wall thickness requirements are precisely met throughout. The weld lines are optimally positioned, minimizing their impact. In this way, we make a significant contribution to the high safety level of the products.”

To make the most of the capabilities of FLEXflow HRS in conjunction with the WIT system, Oerlikon HRSflow has customized the control software for this specific application. Joachim Scheffer, Key Account Manager at Oerlikon HRSflow, explains: “Working closely with PME Fluidtec, we first set up and refined the interface with the WIT system. We then programmed FLEXflow HRS so that the melt fronts, starting at the four injection points, converge in a defined manner at the seat post, in the bottom bracket area as well as at the head tube. Thanks to the ability to precisely control the movements and positions of the individual valve pins, we were also able to adjust the timing of the backpressure so that the separate melt flows in the individual frame parts move back evenly. This project would not have been feasible with conventional hot runner technology.”

Focus on safety and sustainability

Phase 1, top: Starting from the four injection points, the melt spreads throughout the cavity until it is completely filled. Phase 2, bottom: Starting from the opposite side, the water pushes the still-liquid cores of the individual sections back toward the needle-valve nozzles. Oerlikon HRSflow

Developed by former professional cyclists Tony Martin and Marcel Kittel, li:on bikes combine the lightweight design of aluminum frames with the high riding stability of carbon models. With three trim levels, three attractive colors, and frame sizes of 24” and 27.5”, they set a new standard for children’s and youth bicycles in terms of road safety and sustainability.

Thomas Arimond, Managing Director of li:on-bikes, comments: “With the launch of these youth bikes, we are meeting two key requirements: outstanding visibility as a safety feature and environmental sustainability as part of our responsibility as a manufacturer for the ecological footprint of our products. The paint finish in bright, light-reflecting colors and additional lighting elements make them particularly conspicuous, even in poor visibility conditions. This helps protect the health and, in extreme cases, even the lives of young users. On the manufacturing side, we take various measures to ensure that the associated environmental impact remains as low as possible. We manufacture all components in Germany. This keeps transport distances short. In addition, we manufacture virtually ‘on demand.’ This minimizes the number of unsold returns that would otherwise have to be disposed of. The carbon fibers used for the Fibrit material come from the recycling loop. The material itself can also be recycled and returned to production. Compared to aluminum, it has a significantly reduced carbon footprint during manufacturing.”

Help with development projects

To establish on the market such frames, which are made of cost-efficiently processable thermoplastic as an alternative to conventional aluminum and carbon frames, Weber Fibertech founded the Fi.Bi.Tec division (Fiber Bike Technology www.fibitec.com). This focuses on the bicycle industry’s growing interest in “Made in Germany” frames and other components. The company supports OEMs from the feasibility study through to large-scale production in Germany.

“Best Kids Bike” Award

Buyers of the li:on youth bike – shown here in the Urban Green version – can choose from two frame sizes, three trim levels, and four colors. Kids Bike Revolution

Shortly after its market launch, the li:on bikes received a prestigious industry award. During Cyclingworld 2026 – Europe’s show for the finest cycling culture – they were named “Best Kids Bike”.The jury recognized the brand’s innovative concept of modern, safe, and sustainable children’s bicycles. They highlighted the use of special light-reflective paint to make young cyclists more visible in traffic, the bike’s exceptional safety features, and the manufacturing process, which emphasizes sustainable production.

hrsflow.com/

#hrsflow #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

MAAG Group Reinforces Industry Leadership At Plast Milan 2026

MAAG Group Reinforces Industry Leadership At Plast Milan 2026

MAAG Group EBG strand pelletizing system

The MAAG Group will attend Plast Milan in Milan, Italy from June 9 to 12, 2026 and will present modern solutions for polymer processing, and manufacturing as well as pipe and hose production in Hall 13, Booth L09 M10. This will be the first joint appearance in Italy since the acquisition of SIKORA in June 2025. SIKORA is a leading provider of innovative measurement, control, inspection, and sorting technologies.

 

The PURITY CONCEPT V laboratory system inspects and analyzes granules, flakes, and test plates.

At the booth visitors can see:

  • First gear pump specifically designed for pumping hard PVC
  • Efficient strand pelletizing for demanding polymers – low dust, stable, economical
  • High-performance melt filters for recycling processes
  • PURITY CONCEPT V for inspection and analysis of pellets, flakes, and test plates
  • PURITY SCANNER ADVANCED for inspection and sorting of demanding plastic applications
  • CENTERWAVE 6000 for measuring the wall thickness and diameter of pipes from 32 to 1,600 mm
The CENTERWAVE 6000 measures pipes from 32 to 1,600 mm.

Together, MAAG Group and SIKORA show their combined expertise along the entire value chain of plastics processing. “Our aim is not only to provide customers with first-class machines and systems, but also to support them as a long-term partner with in-depth process expertise,” summarizes Ueli Thürig, President MAAG Group.

 

maag.com/

#maag #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

Executive Board Members Reflect On 100 Days At Hosokawa Alpine

Executive Board Members Reflect On 100 Days At Hosokawa Alpine

100 days in office – a good time for an initial review. Since 1 January 2026, Michael Kuhnen as CEO and Kathrin Dörle as CFO have formed the new Executive Board team at Hosokawa Alpine AG. Both bring with them many years of experience and a deep connection to the Augsburg-based engineering company, which specialises in mechanical process engineering and blown film extrusion lines: Kuhnen had previously spent 19 years in various roles at Hosokawa Alpine and returned to the group after a year and a half away, whilst Dörle has been with the company for more than two decades and is the first woman on the Executive Board.

In this interview, the two board members discuss their first 100 days in their new roles: the challenges and initial strategic decisions, their understanding of leadership and collaboration – and the vision with which they intend to shape the future of Hosokawa Alpine.

Was it easy for you to suddenly view Hosokawa Alpine, which you both know so well, from the Executive Board’s perspective?
Our many years of service at the company and the experience gained in various roles provide an excellent foundation for our work on the Executive Board. They make it easier to understand structures, processes and the organisation as a whole. At the same time, the Executive Board perspective brings a fresh outlook on issues and areas with which we were previously less closely involved. The company is our professional home, which we know very well. The task is to consciously broaden our perspective, adopt an overall strategic view and, in doing so, make targeted use of the diverse experience gained from our previous roles.

What were the biggest challenges in the first 100 days?
The first 100 days were heavily influenced by external, unforeseeable factors. Geopolitical developments, such as the war in Iran, have a noticeable impact on key operating conditions.
At the same time, we have to consistently drive forward our strategic realignment in this demanding environment whilst simultaneously implementing measures with immediate effect. Striking this balance between a long-term perspective and operational agility was and still is particularly challenging. Added to this is a high level of internal complexity, which we need to reduce in a targeted manner to simplify decision-making processes.

What strategic decisions did you consciously make early on?
From the outset, a key focus was on developing a clear corporate strategy and implementing the associated process to ensure that this strategy is effectively put into practice on a day-to-day basis.
In addition, we drove forward the expansion of internal communication and turned our attention to the further development of our leadership and corporate culture.
Another focus was on the continuous improvement of the working environment and on increasing efficiency.

How do you define good leadership in the company’s current situation?
For us, good leadership means above all transparency and trust. Openness and mutual respect are particularly important in the current situation to provide direction and create a sense of security. Our aim is to bring everyone on board and to align the company together towards a clear goal: To practise leadership in a way that builds trust – clear in purpose, open in dialogue and committed in action.

What is particularly important to you in your collaboration on the Executive Board?
It is important to us to treat one another with openness and trust and to support one another. We work as a team – always with one another and never against one another. Our shared goal and responsibility for the company are our top priority. This approach creates a working atmosphere in which we can discuss matters constructively and make better decisions together.

In which direction should the company develop over the next three to five years?
Over the next three to five years, we aim to systematically tap into new markets and further strengthen our position. In doing so, we are evolving from a traditional mechanical engineering firm into a comprehensive solutions provider.
Our aim is to cover a wide range of technologies, expand the scope of our offerings across upstream and downstream process steps, and complement these with services, particularly in automation technology and digital solutions.
We also aim to be a partner for our customers in implementing processes across the entire lifecycle.

What should the company stand for in the future – beyond products and figures?
On the one hand, there are our corporate values such as trust, responsibility, appreciation, passion and quality, which form the foundation of our daily collaboration.
Furthermore, innovation is firmly anchored in our corporate strategy. We take a holistic view of innovation, encompassing technologies, processes and working methods.
At the same time, we are clearly committed to sustainability. For us, this means continuously reducing our carbon footprint, contributing to a more sustainable world through our products, and focusing on long-term, sustainable developments rather than short-term effects. In all of this, we rely on our own value creation.

hosokawa-alpine.com/

#hosokawa-alpine #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld  #modernplasticsisrael

ENGEL Focuses On Intelligent Industrial Production At Plastpol 2026

ENGEL Focuses On Intelligent Industrial Production At Plastpol 2026

At PLASTPOL 2026, taking place in Kielce, Poland, from 19 to 22 May, the ENGEL Group shows how intelligent injection moulding solutions improve process stability, efficiency and cost-effectiveness in a targeted manner. ENGEL is focusing its trade fair presentation on production solutions that enable processors to respond more quickly to deviations on the basis of data, reduce scrap and make their manufacturing operations more robust.

At the ENGEL Group’s stand, visitors can see how integrated injection moulding solutions equipped with digital systems help processors stabilise production, reduce scrap, respond more quickly to process deviations and increase overall equipment effectiveness. ENGEL presents comprehensive digitalisation solutions ranging from data acquisition and remote access to real-time process analysis, self-optimising control loops and intelligent operator support in production.

All-electric ENGEL e-mac for medical technology: high process reliability with low energy consumption

In the medical sector, ENGEL presents an all-electric e-mac 200 injection moulding machine with a clamping force of 2,000 kN. The machine produces a component for a medical auto-injector from random PP with white masterbatch. The mould has 32 cavities, the part weight is 0.396 g and the cycle time is less than 10 seconds. The production cell features iQ weight control, which optimises injection volume in real time by automatically compensating for fluctuations in melt viscosity within the same shot. This ensures consistently high part quality and maximum process stability and, as a result, increases OEE.

The compact all-electric ENGEL e-mac 200 in cleanroom design combines high precision with low energy consumption and requires only a small footprint. This supports stable and cost-effective production of demanding medical components.

For additional stability in ongoing operation, ENGEL uses further digital assistance systems from the inject AI family. With iQ clamp control, the system reduces clamping force by up to 33% through automatic optimisation of the clamping force. This protects the mould, lowers energy consumption and increases mould service life for a reliable series production process.

In this production cell, iQ flow control supports the automatic adjustment of mould temperature control and continuously adapts the pump speed of the temperature control units during the ongoing process. This keeps thermal conditions stable, further reduces scrap and lowers energy consumption in production by up to 18%. This demand-based optimisation of mould temperature control stabilises processes and sustainably reduces production costs as well as CO₂ emissions.

In addition, ENGEL presents the Parameter Limits feature on this exhibit. It prevents process parameters from being changed outside the defined process window. This helps avoid operator errors and use personnel resources efficiently.

This exhibit also features iQ process observer. Using AI, it analyses more than 1,000 process parameters, detects deviations at an early stage and provides specific recommendations for action. For processors, this means greater transparency, faster responses to process changes and higher process reliability. Thanks to this well-founded root cause analysis, the effort involved in troubleshooting is reduced by up to 30 minutes per machine. This also helps address the shortage of skilled labour and frees up valuable resources.

The finished parts are removed by an ENGEL viper linear robot and placed on an automatic conveyor belt. The robot is fully integrated into the CC300 machine control system. In combination with iQ motion control, its movements automatically adapt to the machine sequence. This helps further reduce cycle time and energy consumption.

WINTEC t-win: automated production and higher productivity per unit area

Another highlight at the stand is a WINTEC t-win 4500 two-platen injection moulding machine with a clamping force of 4,500 kN in a production cell with a fully integrated viper linear robot.

The high-performance WINTEC t-win two-platen injection moulding machines stand for high platen rigidity, low operating costs, low energy consumption and a small footprint.

The WINTEC t-win is designed for applications with large moulds and high clamping forces. The two-platen machine combines robust construction with short cycle times and high cost-effectiveness. Short-stroke pressure cushions, synchronous locking and the servo-hydraulic drive all contribute to this. In production, processors benefit from a compact machine layout, good maintenance accessibility and energy-efficient operation. This reduces total operating costs and allows investments to pay back more quickly.

iQ weight control also supports process stability in this exhibit.

At the trade fair stand, this production cell manufactures PP lunch boxes with a shot weight of 176 g and a cycle time of 35 seconds. It uses a two-cavity family mould in which the lunch box and the lid are produced at the same time.

After injection moulding, a viper 20 linear robot fully integrated into the C30 machine control system removes the finished individual parts from the mould and places them on an automatic conveyor belt.

This WINTEC production cell clearly shows how automation, process stability and compact system concepts can be combined particularly cost-effectively for standard applications. For processors, this opens up targeted potential to improve efficiency, productivity per unit area and unit cost efficiency.

End-to-end digital solutions with clear benefits for processors

The WINTEC t-win 4500 combines high clamping force with a compact two-platen design, supporting cost-effective production with a small footprint.

At the Expert Corner of the stand, ENGEL also presents the MES authentig and shopfloor monitoring. authentig connects injection moulding machines, makes production data and KPIs available in real time and thus helps reduce set-up times, scrap and downtime. shopfloor monitoring creates a real-time overview of machine statuses and key figures across locations, enabling processors to respond more quickly to deviations and improve their OEE in a targeted way.

engelglobal.com

#engelglobal #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

RAKEZ To Support Industrial Transformation At Make It In The Emirates 2026

RAKEZ To Support Industrial Transformation At Make It In The Emirates 2026

Ras Al Khaimah Economic Zone (RAKEZ) is set to participate in the fifth edition of the Make it in the Emirates exhibition, taking place at ADNEC Centre Abu Dhabi from 4 to 7 May 2026, reinforcing its role in advancing the UAE’s industrial landscape and attracting high-value investments.

As part of its participation, RAKEZ Group CEO Ramy Jallad will join a panel discussion titled “Industrial Zones as Engines of Growth: Powering the UAE’s Industrial and Investment”, where he will share insights on how integrated economic zones are enabling sustainable industrial expansion and supporting long-term investor confidence

The economic zone will also mark the occasion by signing lease agreements with companies across manufacturing and industrial sectors, highlighting continued demand for Ras Al Khaimah as a base for business growth.

During the exhibition, RAKEZ will showcase its comprehensive ecosystem designed to support investors across diverse industrial sectors. This includes advanced infrastructure, tailored solutions, and value-added services that enable businesses to establish, operate, and scale efficiently. With around 1,000 manufacturing companies operating within RAKEZ across sectors such as packaging, F&B, automotive, aviation, construction, and defence, the economic zone continues to contribute to Ras Al Khaimah’s broader manufacturing base of around 3,400 companies.

Companies operating within RAKEZ benefit from a cost-competitive environment, with development costs approximately 10% lower and operating costs around 50% lower than the regional average. In addition, seamless connectivity through ports and airports ensures efficient global market access, while an ecosystem built around sustainability supports businesses in translating ESG ambitions into practical operations. Networking platforms and B2B matchmaking initiatives further enable collaboration and growth within the business community.

Commenting on RAKEZ’s participation, Ramy Jallad said: “Our presence at Make it in the Emirates reflects the growing role we play in shaping the UAE’s economic future. What we are seeing today is a strong shift towards long-term, value-driven investment, where businesses are looking for stability, efficiency, and the ability to scale with confidence. At RAKEZ, we continue to focus on creating an environment where manufacturers and industrial players can operate with clarity, expand sustainably, and connect to global markets with ease.”

He added: “Through our integrated ecosystem and close engagement with our business community, we are enabling companies at every stage of their journey to grow and evolve. This is aligned with the UAE’s broader industrial vision and our ongoing commitment to supporting initiatives such as Operation 300bn.”

As RAKEZ continues to strengthen its presence at national platforms, its participation in Make it in the Emirates 2026 underscores its commitment to attracting high-quality investments, supporting industrial growth, and enabling local manufacturers to expand regionally and globally.

Industrialists are invited to connect with the RAKEZ team at Make It In the Emirates from 4 to 7 May at Stand 7-EN22 in Hall 7 at ADNEC, Abu Dhabi.

rakez.com/en/

#rakez#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

Next-Level Tooling Innovation to Lead DMI 2026 Exhibition

Next-Level Tooling Innovation to Lead DMI 2026 Exhibition

DMI 2026: Mumbai Opportunity Die & Mould India International Exhibition 2026 marks the beginning of four days of innovation, dialogue, and discovery. As exhibitors present next-gen solutions and visitors engage with new ideas, the event reinforces its role as a growth catalyst in India’s tooling industry.

Setting the stage for innovation and industry collaboration, Die & Mould India International Exhibition 2026 (DMI 2026) commenced at the Bombay Exhibition Centre, Goregaon, Mumbai, on April 21,2026. Organised by the Tool & Gauge Manufacturers Association of India (TAGMA), DMI 2026 promises to showcase various technological developments for the booming die and mould industry. It highlights the opportunities and challenges and provides a platform for toolmakers to learn from the user industry.

The four-day event has brought together leading toolmakers, technology providers, and user industries to highlight advancements in die and mould technology, CNC machining, automation, and additive manufacturing, all aimed at strengthening the ‘Make in India’ initiative.

The exhibition’s inauguration ceremony was graced by Mr. Manoj Kolhatkar, MD and CEO, Tata AutoComp Systems Ltd., who was the event’s Chief Guest. Mr. F. R. Singhvi, Joint Managing Director, Sanmar Engineering Ltd. and President, Aerospace India Association; Mr. Vinamra Mishra, Joint Secretary, Ministry of MSME, Government of India; and Mr. Hector D. Villanueva, Chairman, FADMA, were the Guests of Honour. Mr. Devaraya M. Sheregar, President, TAGMA India, and Mr. D. Shanmugam, Vice President, TAGMA India, were also present alongside other dignitaries. The ceremonial lighting of the lamp by the esteemed guests marked the auspicious beginning of the exhibition.

Addressing the Audience
Extending a warm welcome to everyone present at the inauguration ceremony, Mr. Sheregar said, “This year’s Die & Mould India is our largest edition so far. We have over 350 exhibitors participating across three halls; we are expecting 35,000+ visitors over the next three days. Die & Mould India is not just an exhibition. It is a platform where the entire ecosystem comes together to showcase capabilities, exchange ideas, and build partnerships that will shape the future of our industry.”

Talking about the opportunities in the tooling industry, Mr. Sheregar added, “Over the past year, the industry has experienced a positive momentum. Many toolmakers have witnessed robust business growth, improved order books, and better capacity utilisation. At the same time, we are seeing increased investments in advanced technologies, automation, and modern machining capabilities. Many Indian toolmakers are now not only serving domestic customers but are also exporting to global markets. There is also a strong focus on skill development, which is very important for the future of our industry.”

Highlighting the importance of skill development, Mr. Singhvi said, “The government expects the industry to do well, and industry expects the government to support it. Over the last 40 years, many have perished, some have remained small, but many of us have grown in the same environment. The difference lies in the people who run the industry. In my 30-year journey, skill development has been the single most impactful focus. Salaries have risen from INR 18,000 to INR 35,000, but is that enough? Growth depends on people. Ten employees can take you so far, a hundred can take you ten times further, five hundred can take you a hundred times further. Retaining and nurturing employees is the real growth engine.”

Mr. Singhvi added, “We fail to give employees an extra INR 3,000–5,000 or a clear roadmap for their future. That’s how we lose our best people. Skill is the foundation. We face a paradox: millions of young people struggle for jobs, while industries struggle to fulfil orders due to a lack of skilled manpower. Train them, retain them, and in 2–3 years, they will become experts who drive your business forward.”

“The government will support MSMEs, but don’t wait for them to start. If India wants to lead in manufacturing, we must first lead in tooling. That is the foundation of modern industry,” Mr. Singhvi concluded.

Speaking about the contributions of MSMEs, Mr. Mishra noted, “MSMEs have made immense contributions to the country’s economic growth, whether it is exports, where we contribute 45%, or manufacturing GVO, where our share is 37%. The MSME ecosystem today employs close to 8.1 crore people. Clearly, these are the growth drivers. But within this, the tooling industry is the precision gear that drives the entire ecosystem.”

Mr. Mishra added, “The government has set its goal on supporting the manufacturing ecosystem. We need to ideate together and let the government know what works. For example, in the innovation sector, India rose from around 80–90th in the Global Innovation Index to the early 30s within a decade.

This was possible because of investments in R&D and supportive frameworks. Similarly, manufacturing can be strengthened with the right steps. Focusing on the importance of innovation, Mr. Villanueva said, ‘Die & Mould India has established itself as a premium platform for motivation, innovation, and excellence in the tooling and die industry… We are witnessing a transformative moment in manufacturing. Smart manufacturing, CNC technologies, additive manufacturing, and integrated automation are redefining how industry operates. These innovations are enhancing productivity and precision while enabling more sustainable and efficient production systems. I commend TAGMA India for its unwavering commitment to advancing the tooling industry and fostering global competitiveness across sectors like automotive, aerospace, consumers goods, and packaging.”

The opportunities for the tooling industry are expanding. Highlighting the opportunities in the auto industry, Mr. Kolhatkar said, “The Indian economy today is among the brightest in the world, and the auto industry has had its best year ever. In 2025–26, India recorded production of 5.5 million passenger cars, nearly 27 million two-wheelers, and over a million each of commercial vehicles, tractors, and three-wheelers. Auto components, as an industry, crossed $90 billion, and for the first time, exports slightly exceeded imports—showing how far we have matured. Yet, in the tool and die fraternity, we still import about 35%. Every new car model requires tooling investments of around INR 4,000 crore in India, and billions overseas. While frugal engineering helps us keep costs lower, the scope for growth in tooling remains immense.”

Mr. Shanmugasundaram then concluded the ceremony with a Vote of Thanks. He said, “As we inaugurate Die & Mould India 2026, I would like to share a broader perspective on our industry—where we stand today and where we are headed. This is not just the inauguration of an exhibition; it is a reflection of where we have come from in the last 10 years, and where we are going in the next 10.”

He also extended a warm welcome to members of the Federation of Asian Die and Mould Associations (FADMA). “We are honoured to host around 20 delegates from Hong Kong, Japan, Malaysia, the Philippines, South Korea, and Thailand. It is a matter of pride that the FADMA Annual General Meeting is being hosted in India this year, immediately following this exhibition. Your presence strengthens global collaboration, and we truly value this association. I would like to offer a special thanks to all exhibitors, partners, sponsors, and the TAGMA team for creating this outstanding platform,” he said.

DMI: Powering India’s Tooling Future

India introduced the Die & Mould India Exhibition series in 1998 to encourage and strengthen the die and mould fraternity. Over the years, the exhibition has grown into India’s largest platform for the tooling industry. It covers a wide spectrum of products and services, including dies and moulds, press tools, mould bases, hot runner systems, tool steel, heat treatment, gauges, CAD/CAM solutions, additive manufacturing, rapid prototyping, CNC machining centers, EDM, moulding and die-casting machines, polishing equipment, cutting tools, measuring systems, and related accessories. The exhibition provides participants with opportunities to explore new business potential, gain insights into industry challenges, witness live demonstrations, and stay updated with global innovations. The show also serves as a meeting ground for the tooling fraternity.

The 2024 edition of Die & Mould India International Exhibition was a major success. The event featured 300+ exhibitors from 15+ countries and drew more than 38,000 visitors across 15 sectors. Its highlights included 35+ product launches, strong participation in the B2B Pavilion, an engaging Korea Pavilion, and delegations from more than 25 companies. The scale and response reaffirmed the exhibition’s importance as a global hub for tooling excellence and its role in shaping the future of India’s die and mould industry.

tagmaindia.org
diemouldindia.org

#Die&MouldIndia #TAGMA_India #Modernplasticsindia#Pasticsnews #ModernPlasticsIndia
#PrintPublication #PrintMagazine #DigitalGrowth #printpublication #Exhibition

Interpack 2026 Gives Women In Packaging A Global Stage

Interpack 2026 Gives Women In Packaging A Global Stage

With an inspiring keynote from Tetra Pak to kick things off, a high-calibre panel discussion and interactive networking sessions, Women in Packaging is entering its next round at interpack 2026 – and is more powerful, connected and inspiring than ever before.

With “Women in Packaging”, interpack 2026 is once again sending a strong signal for female empowerment, diversity and the future of women’s careers in the industry. The format is aimed specifically at women of all career levels – from ambitious career starters to experienced experts, managers and founders. The focus is on inspiration, eye-level dialogue and specific impetus for the individual career path.

On 11 May 2026, participants can look forward to a programme at the Congress Center Düsseldorf that connects and sets things in motion: a keynote speech will provide strong content-related impetus, an international panel discussion will highlight different career paths and perspectives, and topic-driven networking rounds will create space for genuine exchange, new contacts and mutual support.

Thomas Dohse, Director of interpack, says: “Women in Packaging was still an exception when it premiered in 2023 – today, dialogue on these topics is an integral part of the industry. This exchange is becoming increasingly important, especially in the context of qualified personnel and future skills. interpack introduces a particular international dimension in this respect: participants from all over the world meet speakers from Europe, the USA, South America and Australia and combine different perspectives.”

 

Caroline Babendererde, Head of Sustainability Mid Europe at Tetra Pak

Keynote: impetus for sustainability and diversity

This is the also the vision of Caroline Babendererde, Head of Sustainability Mid Europe at Tetra Pak. With around 30 years of experience in environmental and sustainability management, including more than two decades in the packaging industry, she is one of the major proponents of sustainable packaging solutions in Europe. In addition to her professional activities, she is a guest lecturer on sustainable packaging and cross-discipline sustainability topics at universities. Her perspective demonstrates how closely linked topics such as sustainability, recruiting young talent and the visibility of career paths are. “Packaging is a crucial component of food safety,” says Caroline Babendererde. “We need to demonstrate much more clearly that it protects products, ensures quality and prevents food losses. In doing so, we will be making a direct contribution to security of supply and climate protection. We want to actively strengthen this awareness – among young people, career starters and, of course, not only among women, because those who recognise our industry’s responsibility and innovative strength also see its strong future opportunities.”

“When it comes to diversity, I hope that equity and diversity will soon be a matter of course. We are making progress, but we still have work to do, especially in the apprenticeship and education sector.”

 

Panel: perspectives on careers, change and the future of the industry

The panel will bring together representatives from industry, international organisations and science, thus uniting different perspectives on the development of the processing and packaging industry – shaped by participants’ personal experiences, international career paths and individual focuses.

Jill Evanko, CEO of Duravant

Jill Evanko, CEO of Duravant, will provide insights from the viewpoint of a top manager who has led international industrial companies through transformation and growth.who has led international industrial companies through transformation and growth.

 

Dr Kerstin van Wijk, Global Head of Innovation Packaging Adhesives at Henkel

Dr Kerstin van Wijk, Global Head of Innovation Packaging Adhesives at Henkel, represents industrial practice, combining technological innovation with concrete applications along the value chain.

 

 

 

Luciana Pellegrino, President of the World Packaging Organisation, has enjoyed an exemplary international career in the packaging industry. As the first woman to head the global industry association, she brings along many years of experience in global cooperation between organisations.

Prof. Dr Julia Hartmann from EBS University

Prof. Dr Julia Hartmann from EBS University combines experience from research, consulting and supervisory bodies and will highlight how sustainable transformation can be strategically anchored in companies.

 

 

 

Nerida Kelton, Vice President Sustainability & Save Food at the World Packaging Organisation and Executive Director

The panel will be moderated by Nerida Kelton, Vice President Sustainability & Save Food at the World Packaging Organisation and Executive Director, AIP: “The first Women in Packaging event at interpack 2023 showed us that events like this are desired by the global industry. What makes it so special are the open discussions, the networking, the opportunity to be inspired by women who have already travelled this path, and the occasion for participants to ask questions, discuss challenges and learn from one another. For me, it’s about meeting new people, hearing their stories and strengthening my own global network of inspiring women in the packaging industry that I can draw on in the future.”

Dr Afsaneh Nabifar from BASF

Topic Hubs: exchange that makes connections

New at Women in Packaging are the “Topic Hubs”, topic-driven networking rounds on Career Pathways & Mentorship, Community Building & Peer Networks, Personal Branding & Visibility, Balancing Work & Life and Future Generation & Skills. They will be accompanied by Topic Ambassadors who will structure and deepen the dialogue.

Shannon Doherty-Andall from the Australian Beverages Council

Shannon Doherty-Andall, Chair of Sustainability Working Group, International Fruit and Vegetable Juice Association, is representative of the interface between sustainability, regulation and industrial implementation. Dr Afsaneh Nabifar from BASF combines scientific expertise with international transformation work along the value chain.

 

 

Dr Kathrin Gimpel, CHRO at the renowned brand manufacturer Teekanne

Dr Kathrin Gimpel, CHRO at the renowned brand manufacturer Teekanne, will introduce the perspective of leadership, organisation and corporate culture.

 

 

Monica Battistella, Sustainability Manager at Taghleef Industries

Monica Battistella, Sustainability Manager at Taghleef Industries, contributes her experience in circular economy and regulatory topics as well as her work in international initiatives.

 

 

 

 

Kaie Kaas-Ojavere, CEO und Co-Gründerin des Start-ups KIUD

And Kaie Kaas-Ojavere, CEO and co-founder of the start-up KIUD, represents the topic of entrepreneurial innovation and new approaches in the field of circular packaging solutions.
The Topic Hubs create a practical framework in which experiences can be shared, challenges discussed and new contacts forged.

Event details
Date: Monday, 11 May 2026
Time: 10:30 am
Location: Congress Centre Düsseldorf, 2nd Floor, Room 26, 27, 28
The programme will be hosted by Emily Whigham, journalist and presenter.

Free registration is now open via the following link, places are limited:


https://www.interpack.de/de

#Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

 

Moretto Model Highlights Innovation, Expertise, and Precision

0

Moretto Model Highlights Innovation, Expertise, and Precision

Moretto is a leading company in the plastics processing industry, setting the standard for innovation in the development of cutting-edge solutions. It holds 169 international patents.

The integration of experience, advanced technology and strategic production choices enables the company to design customised solutions, that precisely meet the specific needs of each customer.

Experience at the service of innovation

Renato Moretto President, Moretto S.p.A

In-depth knowledge of the industry and polymer transformation processes, combined with over 45 years of experience and solid human capital, allows Moretto to adopt a quality-oriented approach to design. This synergy enables us to develop innovative, reliable solutions, but also aims to exceed customer expectations, creating real value for them. Research drives us to focus on detail and create ever-improving products and technological solutions, while passion allows us to go beyond the boundaries of what has been done before.

 The importance of research

Innovation means to be brave and looking beyond existing knowledge and the study of individual experiences. When it comes to mathematics and physical phenomena, artificial intelligence can provide valuable assistance. Our company has had a mathematical simulator for parallel computing since 2009, when we acquired the Leonardo simulator. It has played a key role in supporting our technological development and attention to detail.

To turn this vision into reality, Moretto has created an in-house research laboratory equipped with state-of-the-art instruments and simulators, supporting the achievement of previously unimaginable goals. Here, solutions are tested and refined to achieve results previously considered impossible. In addition, the multifunctional showroom serves as a hub where R&D, testing, and training intersect, accelerating development cycles and promoting synergies between the company and its customers.

Complete control over the process

Testing Department

Moretto has established its technological leadership through a vertically integrated industrial model. This involves managing key product development processes in-house, from prototype design to industrialisation and the critical stages of installation, training and after-sales support. Direct control of processes and key components ensures rigorous, constant quality control of product and services.

Moretto nurtures relationships with its partners through active listening and excellent consultancy services, with a view to building long-term relationships. The combination of technical expertise and vertical integration enables us to successfully manage highly complex projects.

Strategic extension for a specialized production

Moretto Headquarters

The expansion of the production area represents the natural evolution of steady organic growth that has seen Moretto strengthen its international presence, thus consolidating its role as a technology partner for leading global players in the plastics industry. The new plant, with a total area of 13,000 square meters, will be physically and functionally integrated with the other existing facilities, optimizing industrial planning and improving the ability to respond to customer requests.

Artificial Intelligence at the service of human

The integration of a new AI-assisted service desk platform represents a step forward for Moretto’s . This technology optimises analysis and provides rapid, accurate responses, supporting the expert team in interpreting complex dynamics. Remote connection guarantees immediate intervention, maximising operational continuity.

Global presence: Moretto de Mexico

The recent opening of the Moretto de Mexico branch in Querétaro aims to respond quickly and effectively to local market demands.

“This expansion represents a strategic step in the company’s international growth. We are excited about strengthening our presence in a dynamic, opportunity-rich market, delivering value to our local customers and improving support with an ever-more efficient service,” confirms Renato Moretto, president of the company.

 Transforming waste into real value

Production Area

In a context where sustainability has become an essential requirement, recycling plays a fundamental role in the future of the plastics industry. The ability to recover, treat and reintegrate polymers into production processes significantly reduces environmental impact, limiting the consumption of virgin raw materials and cutting CO2 emissions.

At Moretto, we believe that recycling is not limited to simply reusing materials but also involves optimising processes to ensure maximum efficiency and maintain high quality standards. Our technologies assist companies in the management of recycled plastics, ensuring the preservation of their mechanical and aesthetic properties while facilitating truly sustainable production processes.

Technology of recycling: efficiency, process control and quality.
– Hyper Cut, the low-speed grinder for different types of waste pieces.
– MPK, the crystallizer for amorphous materials.
– DGM Gravix Maxi, the gravimetric batch blender for rPET bottle flakes.

Plast 2026: all the novelties!

In an industrial context increasingly focused on high performance, traceability and sustainability, Moretto will preview important innovations in drying, gravimetric dosing and material traceability technology at the Plast exhibition in Milan.

These solutions represent a significant evolution compared to traditional systems, offering substantial advantages in terms of energy efficiency, ease of use and performance.

Moretto has proven to be a highly reliable strategic partner, combining solid production capacity with in-depth professional experience and unwavering attention to customer needs.

www.moretto.com
plastonline.org/en

#moretto #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication #injectionmouldingworld #modernplasticsisrael

Bandera Accelerates Global Growth with Region-Specific Market Strategies

Bandera Accelerates Global Growth with Region-Specific Market Strategies

The presentation highlights a comprehensive overview of Bandera’s capabilities, positioning the company as a global leader in extrusion technology and advanced manufacturing solutions. The “Who We Are” segment emphasizes continuous expansion, customer-centric engineering, and a strong commitment to innovation. With two production plants, a state-of-the-art R&D center, and dedicated facilities for testing and development, Bandera demonstrates a robust infrastructure designed to support evolving industry demands. The integration of sustainable practices, including solar energy utilization, further reflects its focus on responsible manufacturing.

The production facility overview showcases significant investment in modernizing operations, including advanced CNC machinery and CAD/CAM systems, enabling high-precision and efficient production processes. With a strong workforce and an expansive facility, the company is well-positioned for future growth and technological advancement.

Bandera’s global presence is reinforced through its “Think Globally, Act Locally” approach, highlighting operations across multiple regions, including India, the USA, and other international markets. This strategy ensures localized support while maintaining global standards.

The service program underlines a complete support ecosystem, offering remote assistance, field services, maintenance, and specialized training. With a focus on operational efficiency and long-term performance, Bandera ensures comprehensive lifecycle support for its customers worldwide.

Bandera continues to set benchmarks in advanced extrusion solutions with its phased approach to AI-driven quality control, redefining operational efficiency and precision in film production.

Phase 1: Infallible Inspector introduces a robust inspection layer that eliminates human error. High-resolution cameras installed at the winder capture images in real time, which are instantly analyzed by Artificial Intelligence. This ensures immediate detection of defects, delivering consistent, uncompromised product quality while reducing dependency on manual inspection.

Phase 2: Intelligent Assistant marks the transition from detection to process intelligence. The system not only identifies defects but also analyzes root causes by correlating them with active machine parameters. It provides actionable insights to operators, enabling precise adjustments in plant settings and significantly improving process optimization.

Phase 3: Autonomous Perfection represents the future of smart manufacturing. The system evolves into a fully self-adjusting machine, capable of detecting defects, diagnosing issues, and autonomously correcting parameters without human intervention. This closed-loop system ensures zero-waste production, maximum efficiency, and continuous process stability.

Bandera at PLAST 2026 presents a strong portfolio of innovations, reinforcing its continuous commitment to research, technology development, and deep understanding of customer requirements.

Bandera’s ongoing investment in research and development continues to drive meaningful improvements across the organization. These advancements represent a significant source of pride for the company and demonstrate its dedication to delivering greater efficiency, reliability, and long-term value to customers across the global plastics processing industry.

A major highlight of Bandera’s presentation is the introduction of a new Business Unit dedicated to Coating and Laminating technologies. This strategic expansion strengthens the company’s capabilities in high-performance film production and advanced material processing, supporting a wide range of industrial and packaging applications.

Bandera will also present the expansion of its Service Program, designed to provide enhanced technical support, faster response times, and improved lifecycle management for installed extrusion lines worldwide. In addition, the Spare Parts Program has been expanded to ensure higher operational reliability, improved machine uptime, and faster delivery of essential components.

On the technology front, Bandera will showcase innovative material solutions including Water-Soluble PVOH/PVA Films, designed for environmentally responsible applications, and Vacuum Film made from 100% Polyamide (PA), offering high performance for demanding industrial processes.

The company will also highlight its expertise in Flat-Die technology for Membranes and Geomembranes, supporting infrastructure, environmental, and construction sectors. Additionally, Bandera will present advanced Technical Sheets in ABS, PMMA, and PC, developed for high-performance engineering and industrial applications.

TWINTELLIGENCE – Advanced Compliance & Performance by Bandera

Bandera’s HVTSE (Highly Vented Twin Screw Extruder) marks a significant technological achievement in PET processing, combining high efficiency with regulatory excellence. The system is backed by N.O.L. 399 (No Objection Letter) and PNC 3258 (Pre-Notification Consultation), ensuring full compliance for food-contact applications. This validation is applicable to all future PET installations, reinforcing confidence for converters and brand owners. Additionally, the solution is fully upgradable for existing PET lines, including FDA-approved installations, enabling seamless integration without major modifications.

BONDERA BARRIER FLEX – 7 Layer Technology at PLAST 2026

Luigi Bandera introduces BONDERA BARRIER FLEX, an advanced 7-layer extrusion solution engineered for high-performance flexible packaging. Scheduled for installation at Bandera in June 2026, this system represents a significant step forward in barrier film production and multilayer technology.

Designed for versatility, BONDERA BARRIER FLEX supports a wide range of applications including barrier films, flexo printing films, packaging films, and general-purpose flexible packaging. The line is optimized to process multiple material combinations such as LDPE, EVA, LLDPE, MLLDPE, along with blends incorporating MDPE, HDPE, and C-O PP, ensuring flexibility across various production requirements.

The structure integrates EVOH and PA in central layers, delivering superior barrier properties essential for extending shelf life and maintaining product integrity. The system offers a lay-flat width up to 2200 mm (trimmed) and 2300 mm tubular film, enabling large-format production.

With a thickness range from 35 to 150 microns for barrier structures and 20 to 200 microns for PE-based films, the line accommodates diverse application needs. The total output reaches up to 550 kg/h with LDPE, ensuring high productivity and operational efficiency.

BONDERA BARRIER FLEX highlights Bandera’s focus on innovation, performance, and advanced multilayer extrusion technologies for next-generation flexible packaging solutions.

luigibandera.com

#Bandera #Modernplasticsindia #Pasticsnews #ModernPlasticsIndiaMagazine
#PrintPublication  #injectionmouldingworld #modernplasticsisrael